Download INSTALLATION MANUAL


2 INSTALLATION
2.2 Opening
Remove the straps (1) and the cardboard packaging (2).
2.1 Unpacking the product
The Power Plus Box condensing system is supplied on a
pallet, strapped and protected by cardboard packaging.
Its condition and compliance with what was ordered must
be checked immediately. The specific characteristics of
the product are indicated on the outside: model, power,
product code and serial number. If there is a discrepancy
between what was ordered and what was received, immediately contact the local agent, warehouse or sales service.
Strap
Cardboard packaging
Pallet
Modular condensing system
Document envelope containing:
-- Instruction manual
-- Hydraulic test and warranty certificate
-- Barcode labels
6 Accessory envelope containing:
-- Natural gas to LPG transformation kit
-- Door key
1
2
3
4
5
The following is also supplied:
positioned on the base inside the modular system:
-- 2 - 5” DN 125 - PN 6 flanges complete with gaskets
-- 1 - 3” DN 80 - PN 6 flange complete with gaskets
-- polypropylene coupling pipes for the flue gas manifold and condensate outlet
positioned inside the control panel:
-- low temperature boiler/delivery sensor
-- outdoor sensor.
bbThe document envelope (5) must be kept in a safe
place. Any copies must be requested from B,
who will send the new documentation within 45 days
and who reserves the right to charge for the copies.
aaDo not dispose of packaging material into the envi-
ronment, or leave it within the reach of children, since
it can become a potential hazard. Dispose of packaging material in compliance with applicable legislation.
1
2
5
6
4
3
21