Download INSTALLATION MANUAL

E727_IM.book Page 68 Thursday, February 5, 2009 9:34 AM
Chapter 6: Troubleshooting
6.2.3 Event messages
Display of event messages
The terminal can detect events during
•
POST (Power On Self Test)
- a self test performed at every power-up,
•
PAST (Person Activated Self Test)
- a self test performed when you click the Self test button under Help desk
in the web interface, or
•
CM (Continuous Monitoring)
- continuous monitoring while the system is in operation.
When the terminal detects an event that requires your action, it issues an
event message.
When your terminal issues an
event message, the Terminal
indicator or the Antenna
indicator in the LED panel on
top of the terminal signals the
event, according to the tables
Terminal indicator and Antenna
indicator in the previous
section.
You can see the active event messages in the web interface by clicking the
warning symbol in the icon bar at the top in the web interface.
All events are logged in the event log. For information on the event log, see
Event log on page 69.
68
Status signaling