Download Software User Manual

Introduction
About the manual
The Stick
This manual describes what you can do with the Plugwise Source software. The main func-
The Stick sends data from the Circles to Source and sends your switching schedules from
tions will be explained: measuring electricity consumption and making schedules to auto-
Source to the Circles. Sending data can take some time. At the bottom left of your screen,
matically switch appliances on and off. The options in the settings menu are discussed as
the icon with the Stick shows the status of data transfers:
well.
The installation manual that was delivered with your Plugwise kit supports you with
The Stick is connected to a network of Circles.
installing the Circles and the software. After the installation of Source has been
completed, the Configuration Wizard will be shown. The first chapter of this manual
provides help for each of the steps taken by the Configuration Wizard. If you have any
The check mark blinks when data is being transmitted. The bar under
further questions after reading this manual, please contact the Plugwise help desk.
the icon shows the progression of the data transmission.
Phone
+31 252 433 070
The Stick has found a Circle and is connecting to it.
E-mail
There’s no connection between the Stick and the Circles. Make sure the
[email protected]
Stick is connected to your computer and that it is within 5 meters of a
Circle that is connected to a power socket.
3