Download LCC-CO2 tool user guide

10
LCC-CO2 tool user guide
Visual guide to using the life-cycle costing
and CO2 assessment tool (LCC-CO2 tool)
Part III – Step-by-step guide
III.1 How to fill in the tool
For reference:
CA.
S.
= Data should be provided by the contracting authority
= Data should be provided by the supplier
(LCC)
= Data only necessary for life-cycle cost calculations
(CO2)
= Data only necessary for CO2 emission calculations
Note: For most of the life-cycle phases, cost/CO2 emission information can either be given as a
single aggregated figure, or can be further detailed on separate worksheets within the tool.
You will need to decide:
• Whether you accept single aggregated figures provided by suppliers (for example, if
the tool is being used for rough calculations within the pre-procurement phase), or if it
requires a more detailed breakdown of costs/emissions.
• Whether you wish to specify the exact types of cost/emissions to be included within
each category. Within the tool, this can be left up to the supplier to define, or can be
defined in advance by the authority with the suppliers simply requested for the figures
and not given the tool itself to complete.
1
Let’s get started!