Download Explosion-Proof MC industrial gear units / Operating Instructions

Important Notes on the Operating Instructions
Important notes and designated use
1
Important Notes on the Operating Instructions
1.1
Important notes and designated use
1
Operating Instructions
Integral part of the product
The operating instructions are an integral part of the explosion-proof MC.. series
industrial gear units and contain important notes on operation and service. The operating instructions are written for all personnel carrying out assembly, installation, startup
and maintenance of the MC.. series industrial gear units.
Designated use
The MC.. series industrial gear units are intended for commercial and industrial systems
and may only be used in compliance with the information provided in SEWEURODRIVE technical documentation and the information given on the nameplate.
They correspond to valid standards and regulations and meet the requirements of EC
Directive 94/9/EC and the EC Directive for Machinery 98/37/EG.
Gear unit loads other than those specified, and applications other than industrial and
commercial systems can only be used after consultation with SEW-EURODRIVE.
Each application above and beyond these is considered non-designated use.
Qualified personnel
Explosion-proof MC.. series industrial gear units are a potential source of hazards for
personnel and equipment. Consequently, only trained personnel who are aware of the
potential hazards may perform assembly, installation, startup, and service work.
Personnel must be appropriately qualified for the task in hand and must be familiar with
the
•
assembly
•
installation
•
startup
•
operation
of the product.
Personnel must carefully read the operating instructions, in particular the safety notes
section, and make sure that they understand and comply with them.
Operating Instructions – Explosion-Proof MC.. Series Industrial Gear Units
5