Download Biostar P4M890-M7 FE Owner's Manual
Transcript
P4M900-M7 FE/P4M890-M7 FE Setup Manual FCC Information and Copyright This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation. T his equipment generates , uses , and c an radiate radio frequency energy and, if not ins talled and used in accordance with the instructions , may cause harmful interference to radio communications . There is no guarantee that interference will not occur in a particular ins tallation. The vendor makes no representations or warranties with respec t to the contents here and s pecially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make c hanges to the c ontents here without obligation to notify any party beforehand. D uplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing. The content of this user’s manual is subject to be c hanged without notice and we will not be res ponsible for any mis takes found in this user’s manual. All the brand and produc t names are trademarks of their respec tive companies . Table of Contents Chapter 1: Introduction.....................................................3 1.1 Before You Start................................................................... 3 1.2 Package Checklist................................................................ 3 1.3 Motherboard Features.......................................................... 4 1.4 Rear Panel Connectors.......................................................... 5 1.5 Motherboard Layout ............................................................ 6 Chapter 2: Hardware Installation........................................7 2.1 Installing Central Processing Unit (CPU) ................................ 7 2.2 Fan Headers......................................................................... 9 2.3 Installing System Memory.....................................................10 2.4 Connectors and Slots ............................................................12 Chapter 3: Headers & Jumpers Setup................................. 14 3.1 How to Setup Jumpers..........................................................14 3.2 Detail Settings.....................................................................14 Chapter 4: RAID Functions ............................................... 20 4.1 Operation System................................................................20 4.2 Raid Arrays.........................................................................20 4.3 How RAID Works.................................................................20 Chapter 5: Useful Help ..................................................... 22 5.1 Driver Installation Note .......................................................22 5.2 Award BIOS Beep Code........................................................23 5.3 Extra Information................................................................23 5.4 Troubleshooting...................................................................24 A ppendencies: SPEC In Other Language............................. 26 German................................................................................................26 France..................................................................................................28 Italian..................................................................................................30 Spanish ................................................................................................32 Portuguese...........................................................................................34 Polish...................................................................................................36 Russian ................................................................................................38 Arabic..................................................................................................40 Japanese ..............................................................................................42 P4M900-M7 FE/P4M890-M7 FE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Always disconne ct the compute r from powe r outle t be fore ope ration. Before you take the mothe rboard out from anti-static bag, ground yourse lf prope rly by touching any safe ly grounde d appliance, or use grounded wrist strap to remove the static charge. Avoid touching the compone nts on mothe rboard or the rear side of the board unless ne cessary. Hold the board on the edge , do not try to be nd or flex the board. 1.2 Do not leave any unfastene d small parts inside the case afte r installation. Loose parts will cause short circuits which may damage the equipment. Keep the compute r from dange rous a rea, such as hea t source , humid air and wate r. PACKAGE CHECKLIST HDD Cable X 1 Installation Guide X 1 Fully Se tup Drive r C D X 1 (full ve rsion manual files inside ) Rear I/O Panel for ATX Case X 1 FDD Cable X 1 (optional) Se rial ATA Cable X 1 (optional) USB 2.0 Cable X1 (optional) Se rial ATA Powe r Cable X 1 (optional) Note: The package contents may differ by area or your motherboard version. 3 Motherboard Manual 1.3 MOT HERBOARD FEAT URES P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / Intel Core2Duo/ Pe ntium 4 / Pentium D / Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.8 GHz CPU GHz *It is recommende d to use processors with *It is recommende d to use processors with 95W power co nsumption. 95W power co nsumption. Supports Hyper Thre ading/ Ex ecute Disable Supports Hyper Thre ading/ Ex ecute Disable FSB Chipset Graphic Super I/O Bit/ Enhanced Intel S peedStep®/ Intel Bit/ Enhanced Intel S peedStep®/ Intel Extende d Memor y 64 technolo gy Extende d Memor y 64 technolo gy 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz VIA P4M900 VIA P4M890 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Max Share d Vide o Memory is 256 MB Max Share d Vide o Memory is 256 MB ITE 8712F ITE 8712F Provides the most commonly used legacy Provides the most commonly used legacy Super I/O functionality. Super I/O functionality. Low Pin C ount Interface Low Pin C ount Interface Enviro nment Co ntrol initiatives, Enviro nment Co ntrol initiatives, H/W Monitor H/W Monitor Fan Spee d Co ntroller Fan Spee d Co ntroller ITE's "Smart Guardia n" function ITE's "Smart Guardia n" function DIMM Slots x 2 DIMM Slots x 2 Supports DDR2 533 / 667 Supports DDR2 533 / 667 Each DIMM supports 256/ 512MB/1GB/ 2GB Each DIMM supports 256/ 512MB/1GB/ 2GB Main Memory IDE SATA LAN PHY Sound Codec 4 DDR2 DDR2 Max Memory C apicity 4GB Max Memory C apicity 4GB Single Channel Mode DDR2 memory Single Channel Mode DDR2 memory module module Registered DIMM and ECC DIMM is not Registered DIMM and ECC DIMM is not supported supported Integrated I DE Controller Integrated I DE Controller Ultra DMA 33~133 B us Master Mode Ultra DMA 33~133 B us Master Mode supports PIO Mo de 0~4, supports PIO Mo de 0~4, Integrated Seri al ATA Controller Integrated Seri al ATA Controller Data transfer rates up to 1.5 Gb/s. Data transfer rates up to 1.5 Gb/s. SATA Version 1.0 specification complia nt. SATA Version 1.0 specification complia nt. Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y 10 / 100 Mb/s auto negotiation 10 / 100 Mb/s auto negotiation Half / Full duplex capability Half / Full duplex capability ALC662 ALC662 5.1 cha nnels a udio o ut 5.1 cha nnels a udio o ut High- Defi nition Audio s upport High- Defi nition Audio s upport P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE Slots On Board Connector Back Panel I/O P4M890-M7 FE PCI Expr ess x 16 slot x1 PCI Expr ess x 16 slot x1 PCI Expr ess x 1 slot x1 PCI Expr ess x 1 slot x1 PCI slot x2 PCI slot x2 Floppy connector x1 Floppy connector x1 Printer Port C onnector x1 Printer Port C onnector x1 IDE Co nnector x2 IDE Co nnector x2 SATA Connector x2 SATA Connector x2 Front Pa nel Co nnector x1 Front Pa nel Co nnector x1 Front Audi o Co nnector x1 Front Audi o Co nnector x1 CD-in Co nnector x1 CD-in Co nnector x1 CPU Fan hea der x1 CPU Fan hea der x1 System Fan hea der x1 System Fan hea der x1 Clear CMOS header x1 Clear CMOS header x1 USB connector x2 USB connector x2 Power Connector ( 24pi n) x1 Power Connector ( 24pi n) x1 Power Connector ( 4pin) x1 Power Connector ( 4pin) x1 PS/2 Keyboard x1 PS/2 Keyboard x1 PS/2 Mo use x1 PS/2 Mo use x1 Serial Port x1 Serial Port x1 VGA Port x1 VGA Port x1 LAN port x1 LAN port x1 USB Port x4 USB Port x4 Audio J ack x3 Audio J ack x3 Board Size 190 mm (W) x 244 mm (L) Special Feature OS Support 1.4 190 mm (W) x 244 mm (L) RAID 0 / 1 support RAID 0 / 1 support Windows 2000 / XP / VISTA Windows 2000 / XP Biostar Reserves the right to add or remo ve Biostar Reserves the right to add or remove support for any OS with or witho ut notice. support for any OS with or witho ut notice. REAR PANEL CONNECT ORS LAN PS/2 Mouse Li ne In/ Surround Line Out Mic In 1/ Bass/ Center PS/2 Keyboard COM1 VGA USBX2 USBX2 Since the audio c hip s upports High Definiti on Audio Specific ation, the func tion of eac h audi o jack c an be defined by software. T he input / output function of each audio jac k listed above represents the default s etti ng. However, when c onnecti ng exter nal microphone to the audio port, pleas e us e the Line In (blue) and Mic In (Pink) audio j ac k. 5 Motherboard Manual 1.5 MOT HERBOARD LAYOUT JCFAN1 JKBMS1 COM1 JCOM1 LGA775 CPU1 DIMM1 JVGA1 JPRNT1 JATXPWR2 JUSBLAN1 P4M900 or P4M890 IDE2 JUSBV1 IDE1 JUSB1 DIMM2 JATXPWR1 LAN JAUDIO1 PCI-EX16 Super I/O PCI-EX1_1 BAT1 BIOS JSATA2 JU SB2 VIA VT8237A PCI1 JCDIN1 JSATA1 JUSB3 PCI2 JUSBV2 JCMOS1 Codec JAUDIOF1 FDD1 JSFAN1 JPAN EL 1 Not e: ■ represe nts the 1st pin. 6 P4M900-M7 FE/P4M890-M7 FE CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle. 7 Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation. 8 P4M900-M7 FE/P4M890-M7 FE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Heade r 4 1 Pin 1 2 3 4 Assignment Ground +12V FAN RPM rate sense Smart Fan Control JSFAN1: System Fan He ader Pin 1 2 3 3 Assignment Ground +12V FAN RPM rate sense 1 Note: The JSFAN1 supports 3-pin head connector and the JCFAN1 supports 4-pin head connector. When connecti ng with wires onto connectors, pl ease note that the r ed wire is the positi ve and should be connected to pin#2, and the black wire is Ground and should be connected to GND. 9 Motherboard Manual 2.3 INST ALLING SYST EM MEMORY DIMM1 DIMM2 A. Memory Modules 1. 10 Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. P4M900-M7 FE/P4M890-M7 FE 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. B. Memory Capacity DIMM Socket Location DIMM1 256MB/512MB/1GB/2GB DIMM2 256MB/512MB/1GB/2GB DDR2 Module Total Memory Size Max is 4GB. 11 Motherboard Manual 2.4 CONNECT ORS AND SLOT S FDD1: Floppy Disk Conne ctor The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cable. 2 34 1 33 IDE1/IDE2: Hard Disk Conne ctors The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality. It has two HDD connectors: IDE1 (primary ) and IDE2 (secondary ). The IDE connectors can connect a master and a slav e driv e, so you can connect up to four hard disk drives. The f irst hard drive should always be connected to IDE1. 40 39 2 1 IDE1 12 IDE2 P4M900-M7 FE/P4M890-M7 FE PCI-EX16: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, f or an aggregate of 8GB/s totally. PCI-EX1_1: PCI-Express x1 Slot - PCI-Express 1.0a compliant. - Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth ov er the traditional PCI architecture. PCI-EX16 PCI-EX1_1 PCI1/PCI2: Pe riphe ral Component Inte rconne ct Slots This motherboard is equipped with 2 standard PCI slots. PCI stands f or Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. PCI1 PCI2 13 Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DET AIL SETT INGS JPANEL1: Front Panel Heade r This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch f unctions. PWR_LED On/Off ++ - 9 1 + SPK Pin 1 2 3 4 5 6 7 8 14 Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control Functio n Speaker Connector Hard drive LED Reset button Pin 9 10 11 12 13 14 15 16 16 8 RST HLED Assignment N/A N/A N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground Functio n N/A N/A Power LED Power-on button P4M900-M7 FE/P4M890-M7 FE ATX Powe r Source Conne ctor: JATXPWR1 JATXPWR1 allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V JATXPWR2: ATX Powe r Source Conne ctor By connecting this connector, it will provide +12V to CPU power circuit. 1 4 2 3 Pin 1 2 3 4 Assignment +12V +12V Ground Ground Note: Befor e power on the system, please make sure that both JATXPWR1 and JATXPWR2 connectors have been pl ugged-in. 15 Motherboard Manual JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC f ront panel, and also can be connected with internal USB devices, like USB card reader. 2 10 JUSB2 1 9 JUSB3 Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JSATA1/JSATA2: Se rial ATA Conne ctors The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace, it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s. JSATA2 7 4 1 1 4 7 Pin 1 2 3 4 5 6 7 Assignment Ground T X+ T XGround RXRX+ Ground JSATA1 JAUDIO F1: Front Panel Audio Heade r This header allows user to connect the front audio output cable with the PC f ront panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable. 16 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense P4M900-M7 FE/P4M890-M7 FE JCDIN1: CD-RO M Audio-in Connector This connector allows user to connect the audio source f rom the v ariaty dev ices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc. Assignment Left Channel Input Ground Ground Right Channel Input Pin 1 2 3 4 4 1 JCMO S1: Cle ar CMOS Heade r By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 1 3 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Proce dures: 1. 2. 3. 4. 5. 6. Remov e AC power line. Set the jumper to “Pin 2-3 close”. Wait f or f ive seconds. Set the jumper to “Pin 1-2 close”. Power on the AC. Reset y our desired password or clear the CMOS data. 17 Motherboard Manual JPRNT1: Printe r Port Connector This header allows you to connector printer on the PC. 25 2 18 Assignment 1 Pin 1 -Strobe Pin 14 Ground Assignment 2 3 4 5 -ALF Data 0 -Error Data 1 15 16 17 18 Data 6 Ground Data 7 Ground 6 7 8 9 -Init Data 2 -Scltin Data 3 19 20 21 22 -ACK Ground Busy Ground 10 11 12 13 Ground Data 4 Ground Data 5 23 24 25 26 PE Ground SCLT Key P4M900-M7 FE/P4M890-M7 FE JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1. JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3). Pin 2-3 Close: JUSBV1: +5V STB for USB ports at JUSB1/JUSBLAN1. JUSBV2: +5V STB for USB ports at f ront panel (JUSB2/JUSB3). 1 JUSBV1 1 3 Pin 1-2 close 3 JUSBV2 1 3 Pin 2-3 close 1 3 19 Motherboard Manual CHAPTER 4: RAID FUNCTIONS 4.1 O PERAT ION SYST EM Supports Windows XP, Windows 2000 Professional, and Windows Vista. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. 4.3 HOW RAID WORKS RAID 0: The controller “ stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth. Features and Benefits Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platf orm. Uses: Intended for non-critical data requiring high data throughput, or any env ironment that does not require f ault tolerance. Benefits: prov ides increased data throughput, especially f or large files. No capacity loss penalty f or parity. Drawbacks: Does not deliver any fault tolerance. If any drive in the array f ails, all data is lost. Fault Tolerance: No. Blo ck 1 Block 3 Block 5 20 Block 2 Block 4 Block 6 P4M900-M7 FE/P4M890-M7 FE RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Features and Benefits Drives: Minimum 2, and maximum is 2. Uses: RAID 1 is ideal f or small databases or any other application that requires f ault tolerance and minimal capacity. Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the controller switches to the other drive. Drawbacks: Requires 2 driv es for the storage space of one driv e. Perf ormance is impaired during driv e rebuilds. Fault Tolerance: Yes. Block 1 Block 2 Block 3 Block 1 Block 2 Block 3 21 Motherboard Manual CHAPTER 5: USEFUL HELP 5.1 DRIVER INST ALLAT ION NOT E After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B. Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C. Manual Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note: You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep 2.html 22 P4M900-M7 FE/P4M890-M7 FE 5.2 AWARD BIOS BEEP CODE Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or v ideo card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install 5.3 EXT RA INFORMAT ION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” section) 2. Wait for seconds. 3. Power on the system again. 23 Motherboard Manual 5.4 TROUBLESHOOT ING Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light don’t illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning. module snaps into place. 1. System does not boot from hard disk 1. driv e, can be booted f rom optical driv e. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the driv e type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. 1. Back up data and applications System only boots f rom optical driv e. f iles. Hard disk can be read and applications can be used but booting from hard disk 2. Ref ormat the hard driv e. is impossible. Re-install applications and data using backup disks. Screen message says “Invalid Rev iew system’s equipment. Make sure Conf iguration” or “CMOS Failure.” correct inf ormation is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard driv e. correctly. 2. Run SETUP program and select correct driv e types. Call the drive manuf acturers f or compatibility with other drives. 24 P4M900-M7 FE/P4M890-M7 FE This page is intentionally left blank. 25 Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / Intel Core2Duo/ Pe ntium 4 / Pentium D / Celeron D / Celer on 4xx Prozessoren mit bis Celeron D / Celer on 4xx Prozessoren mit bis zu 3,8 GHz CPU zu 3,8 GHz *It is recommende d to use processors with *It is recommende d to use processors with 95W power co nsumption. 95W power co nsumption. Unterstützt Hyper-Thre ading / Execute Unterstützt Hyper-Thre ading / Execute Disable Bit / Enha nced I ntel Spee dStep® / Disable Bit / Enha nced I ntel Spee dStep® / FSB Chipsatz Grafik Super E/A Intel Architecture-64 / Extended Memory Intel Architecture-64 / Extended Memory 64 Technology 64 Technology 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz VIA P4M900 VIA P4M890 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Max. 256MB gemei nsam be nutzter Max. 256MB gemei nsam be nutzter Videospeicher Videospeicher ITE 8712F ITE 8712F Bietet die häufi g verwe ndete n alte n Super Bietet die häufi g verwe ndete n alte n Super E/A-Funktio nen. E/A-Funktio nen. Low Pin C ount-Schnittstelle Low Pin C ount-Schnittstelle Umgebungskontrolle, Umgebungskontrolle, Hardware-Überwachung Hardware-Überwachung Lüfterdre hzahl-Co ntroller Lüfterdre hzahl-Co ntroller "Smart Guar dian" -Funktion v on ITE "Smart Guar dian" -Funktion v on ITE DDR2 DIMM-Steckplätze x 2 DDR2 DIMM-Steckplätze x 2 Unterstützt DDR2 533 / 667 Unterstützt DDR2 533 / 667 Jeder DIMM unterstützt Jeder DIMM unterstützt Arbeitsspe 256/512MB/1GB/2GB DDR2. 256/512MB/1GB/2GB DDR2. icher Max. 4GB Ar beitsspeicher Max. 4GB Ar beitsspeicher Ein-Kanal DDR2 S peichermodul Ein-Kanal DDR2 S peichermodul registrierte DIMMs. ECC DIMMs werde n registrierte DIMMs. ECC DIMMs werde n nicht unterstützt. nicht unterstützt. Integrierter IDE-Co ntroller Integrierter IDE-Co ntroller Ultra DMA 33 / 66 / 100 / 133Bus Ultra DMA 33 / 66 / 100 / 133Bus Master-Modus Master-Modus Unterstützt PIO-Modus 0~4, Unterstützt PIO-Modus 0~4, Integrierter Serial ATA-Controller Integrierter Serial ATA-Controller Datentransferr ate bis zu 1.5Gb/s Datentransferr ate bis zu 1.5Gb/s IDE SATA Konform mit der SATA-Spezifikation Version Konform mit der SATA-Spezifikation Version 1.0. 26 1.0. P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE LAN PHY Audio-Cod ec Steckplätz e Onboard-A nschluss Rückseiten -E/A Platinengr öße. Sonderfun ktionen OS-Unters tützung P4M890-M7 FE Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y 10 / 100 Mb/s A uto-Negotiation 10 / 100 Mb/s A uto-Negotiation Halb-/ Vollduplex- Funktion Halb-/ Vollduplex- Funktion ALC662 ALC662 Unterstützt High- Definitio n Audio Unterstützt High- Definitio n Audio 5.1-Kanal-Audioausgabe 5.1-Kanal-Audioausgabe PCI-Steckplatz x2 PCI-Steckplatz PCI Expr ess x16 Steckplatz x1 PCI Expr ess x16 Steckplatz x2 x1 PCI Expr ess x 1-Steckplatz x1 PCI Expr ess x 1-Steckplatz x1 Diskettenlaufwerk anschluss x1 Diskettenlaufwerk anschluss x1 Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1 IDE-Anschluss x2 IDE-Anschluss x2 SATA-Anschluss x2 SATA-Anschluss x2 Fronttafela nschluss x1 Fronttafela nschluss x1 Front-Audioa nschluss x1 Front-Audioa nschluss x1 CD-IN-Anschluss x1 CD-IN-Anschluss x1 CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1 System-Lüfter-Sockel x1 System-Lüfter-Sockel x1 "CMOS löschen"-Sockel x1 "CMOS löschen"-Sockel x1 USB-Anschluss x2 USB-Anschluss x2 Stromanschluss (24- polig) x1 Stromanschluss (24- polig) x1 Stromanschluss (4-poli g) x1 Stromanschluss (4-poli g) x1 PS/2-Tastatur x1 PS/2-Tastatur x1 PS/2-Maus x1 PS/2-Maus x1 Serieller Anschluss x1 Serieller Anschluss x1 VGA-Anschluss x1 VGA-Anschluss x1 LAN-Anschluss x1 LAN-Anschluss x1 USB-Anschluss x4 USB-Anschluss x4 Audioanschluss x3 Audioanschluss x3 190 mm (B) X 244 mm (L) 190 mm (B) X 244 mm (L) Unterstützt RAID 0 / 1 Unterstützt RAID 0 / 1 Windows 2K / XP / VISTA Windows 2K / XP Biostar behält sich das Recht v or, ohne Biostar behält sich das Recht v or, ohne Ankündigung die Unterstützung für ei n Ankündigung die Unterstützung für ei n Betriebssystem hinzuzufügen oder zu Betriebssystem hinzuzufügen oder zu entfernen. entfernen. 27 Motherboard Manual FRANCE P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Processeurs Intel Core 2Duo/ P entium 4 / Processeurs Intel Core 2Duo/ P entium 4 / Pentium D / Celeron D / Celeron 4xx jusqu'à Pentium D / Celeron D / Celeron 4xx jusqu'à 3,8 GHz 3,8 GHz *It is recommende d to use processors with *It is recommende d to use processors with UC 95W power co nsumption. 95W power co nsumption. Prend en charge les technologies Prend en charge les technologies Hyper -Thre ading / d'ex écution de bit de Hyper -Thre ading / d'ex écution de bit de désactivation / I ntel Spe edStep® désactivation / I ntel Spe edStep® optimisée/ d'architecture I ntel 64 / de optimisée/ d'architecture I ntel 64 / de mémoire étendue 64 mémoire étendue 64 Bus frontal 533 / 800 / 1066 MHz Chipset Graphi que s 533 / 800 / 1066 MHz VIA P4M900 VIA P4M890 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Mémoire vidé o partagée maximale de 256 Mémoire vidé o partagée maximale de 256 Mo Mo ITE 8712F ITE 8712F Fournit la fo nctionnalité de Super E/S Fournit la fo nctionnalité de Super E/S patrimoniales la plus utilisée. patrimoniales la plus utilisée. Interface à faible compte de broc hes Interface à faible compte de broc hes Initiatives de co ntrôle e nvironnementales, Initiatives de co ntrôle e nvironnementales, Moniteur de matériel Moniteur de matériel Contrôleur de vitesse de ventilateur Contrôleur de vitesse de ventilateur Fonction " Gardie n i ntelligent" de l'ITE Fonction " Gardie n i ntelligent" de l'ITE Fentes DDR 2 DIMM x 2 Fentes DDR 2 DIMM x 2 Prend en charge la DDR 2 533 / 667 Prend en charge la DDR 2 533 / 667 Chaque DIMM prend e n charge des DDR2 Chaque DIMM prend e n charge des DDR2 de 256 Mo /512 M o / 1Go / 2 Go de 256 Mo /512 M o / 1Go / 2 Go Mémoire Capacité mémoire maximale de 4 Go Capacité mémoire maximale de 4 Go principale Module de mémoire DDR2 à mode à simple Module de mémoire DDR2 à mode à simple Super E/S voie voie Les DIMM à r egistres et DIMM avec code Les DIMM à r egistres et DIMM avec code correcteurs d'erreurs ne so nt pas prises en correcteurs d'erreurs ne so nt pas prises en IDE SATA 28 charge charge Contrôleur IDE intégr é Contrôleur IDE intégr é Mode pri ncipale de Bus Ultra DMA 33 / 66 / Mode pri ncipale de Bus Ultra DMA 33 / 66 / 100 / 133 100 / 133 Prend en charge le mode PIO 0~4, Prend en charge le mode PIO 0~4, Contrôleur Serial ATA intégré Contrôleur Serial ATA intégré Taux de transfert jusqu'à 1.5 Go/s. Taux de transfert jusqu'à 1.5 Go/s. Conforme à la spécification SATA Version Conforme à la spécification SATA Version 1.0 1.0 P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE LAN PHY Codec audio Fentes P4M890-M7 FE Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y 10 / 100 Mb/s négociation a utomatique 10 / 100 Mb/s négociation a utomatique Half / Full duplex capability Half / Full duplex capability ALC662 ALC662 Prise en c harge de l'audio haute dé finition Prise en c harge de l'audio haute dé finition Sortie audio à 5.1 voies Sortie audio à 5.1 voies Fente PCI x2 Fente PCI x2 Slot PCI Ex press x16 x1 Slot PCI Ex press x16 x1 Slot PCI Ex press x 1 x1 Slot PCI Ex press x 1 x1 Connecteur de disquette x1 Connecteur de disquette x1 Connecteur de P ort d'imprimante x1 Connecteur de P ort d'imprimante x1 Connecteur IDE x2 Connecteur IDE Connecteur SATA x2 Connecteur SATA x2 Connecteur du pa nne au avant x1 Connecteur du pa nne au avant x1 Connecteur Audio du panneau ava nt x1 Connecteu Connecteur d'entré e CD r Embase de ve ntilateur UC x2 Connecteur Audio du panneau ava nt x1 x1 Connecteur d'entré e CD x1 x1 Embase de ve ntilateur UC x1 embarqué Embase de ve ntilateur système x1 Embase de ve ntilateur système x1 Embase d'e ffacement CMOS x1 Embase d'e ffacement CMOS x1 Connecteur USB x2 Connecteur USB x2 Connecteur d'alimentatio n x1 Connecteur d'alimentatio n x1 (24 broches) Connecteur d'alimentatio n (24 broches) x1 (4 br oches) Connecteur d'alimentatio n x1 (4 br oches) Clavier PS/2 x1 Clavier PS/2 Souris PS/2 x1 Souris PS/2 x1 x1 E/S du Port série x1 Port série x1 panneau Port VGA x1 Port VGA x1 arrière Port LAN x1 Port LAN x1 Port USB x4 Port USB x4 Fiche audio x3 Fiche audio x3 Dimension s de la 190 mm (l) X 244 mm (H) 190 mm (l) X 244 mm (H) Prise en c harge RAID 0 / 1 Prise en c harge RAID 0 / 1 carte Fonctionna lités spéciales Windows 2K / XP / VISTA Windows 2K / XP Support Biostar se réserve le droit d'ajo uter o u de Biostar se réserve le droit d'ajo uter o u de SE supprimer le support de SE avec o u sa ns supprimer le support de SE avec o u sa ns préavis. préavis. 29 Motherboard Manual IT ALIAN P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Processore Intel Core 2Duo/ Pentium 4 / Processore Intel Core 2Duo/ Pentium 4 / Pentium D / Celeron D / Celer on 4xx fi no a Pentium D / Celeron D / Celer on 4xx fi no a 3.8 GHz CPU 3.8 GHz *It is recommende d to use processors with *It is recommende d to use processors with 95W power co nsumption. 95W power co nsumption. Supporto di Hyper -Threadi ng / Execute Supporto di Hyper -Threadi ng / Execute Disable Bit / Enha nced I ntel Spee dStep® / Disable Bit / Enha nced I ntel Spee dStep® / Architettura Intel 64 / Tecnologi a Extende d Architettura Intel 64 / Tecnologi a Extende d Memory 64 FSB Memory 64 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz VIA P4M900 VIA P4M890 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics La memoria vi deo co ndivisa massima è di La memoria vi deo co ndivisa massima è di 256MB 256MB ITE 8712F ITE 8712F Fornisce le funzio nalità legacy Super I/O Fornisce le funzio nalità legacy Super I/O usate più comunemente. usate più comunemente. Interfaccia LPC (L ow Pin Count) Interfaccia LPC (L ow Pin Count) Funzioni di co ntrollo dell’ambiente: Funzioni di co ntrollo dell’ambiente: Monitoraggio hardware Monitoraggio hardware Controller velocità ventolina Controller velocità ventolina Funzione "Smart Guardi an" di I TE Funzione "Smart Guardi an" di I TE Alloggi DIMM DDR 2 x 2 Alloggi DIMM DDR 2 x 2 Supporto di DDR2 533 / 667 Supporto di DDR2 533 / 667 Ciascun DIMM supporta DDR 2 256MB / Ciascun DIMM supporta DDR 2 256MB / Memoria 512MB / 1GB / 2GB 512MB / 1GB / 2GB principale Capacità massima della memori a 4GB Capacità massima della memori a 4GB Chipset Grafica Super I/O Modulo di memoria DDR2 a canale singolo Modulo di memoria DDR2 a canale singolo IDE SATA 30 DIMM registrati e DIMM ECC no n sono DIMM registrati e DIMM ECC no n sono supportati supportati Controller IDE i ntegrato Controller IDE i ntegrato Modalità Bus Master Ultra DMA 33 / 66 / Modalità Bus Master Ultra DMA 33 / 66 / 100 100 / 133 / 133 Supporto modalità PIO Mode 0- 4 Supporto modalità PIO Mode 0- 4 Controller Serial ATA inte grato Controller Serial ATA inte grato Velocità di trasferimento dei dati fi no a 1.5 Velocità di trasferimento dei dati fi no a 1.5 Gb/s. Gb/s. Compatibile specifiche SATA Versione 1.0. Compatibile specifiche SATA Versione 1.0. P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE LAN PHY Codec audio Alloggi Connettori su scheda P4M890-M7 FE Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y Negoziazione automatica 10 / 100 Mb/s Negoziazione automatica 10 / 100 Mb/s Capacità Half / Full Duplex Capacità Half / Full Duplex ALC662 ALC662 Supporto audio High-Definition (HD) Supporto audio High-Definition (HD) Uscita audio 5.1 canali Uscita audio 5.1 canali Alloggio PCI x2 Alloggio PCI Alloggio PCI Ex press x16 x1 Alloggio PCI Ex press x16 x2 x1 Alloggio PCI Ex press x1 x1 Alloggio PCI Ex press x1 x1 Connettore flo ppy x1 Connettore flo ppy x1 Connettore Porta stampa nte x1 Connettore Porta stampa nte x1 Connettore IDE x2 Connettore IDE x2 Connettore SATA x2 Connettore SATA x2 Connettore pa nnello fro ntale x1 Connettore pa nnello fro ntale x1 Connettore audio frontale x1 Connettore audio frontale x1 Connettore CD-in x1 Connettore CD-in x1 Collettore ventolina CPU x1 Collettore ventolina CPU x1 Collettore ventolina sistema x1 Collettore ventolina sistema x1 Collettore cancellazione CMOS x1 Collettore cancellazione CMOS x1 Connettore USB x2 Connettore USB x2 Connettore alimentazione x1 Connettore alimentazione x1 (24 pin) Connettore alimentazione (24 pin) x1 (4 pi n) Connettore alimentazione x1 (4 pi n) Tastiera PS/2 x1 Tastiera PS/2 Mouse PS/2 x1 Mouse PS/2 x1 I/O Porta seriale x1 Porta seriale x1 pannello x1 Porta VGA x1 Porta VGA x1 posteriore Porta LAN x1 Porta LAN x1 Porta USB x4 Porta USB x4 Connettore audio x3 Connettore audio x3 Dimension i scheda 190 mm (lar ghezza) x 244 mm (altezza) 190 mm (lar ghezza) x 244 mm (altezza) Supporto RAID 0 / 1 Supporto RAID 0 / 1 Windows 2K / XP / VISTA Windows 2K / XP Biostar si riserva il diritto di aggiungere o Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema rimuovere il supporto di qualsiasi sistema operativo se nza pre avviso. operativo se nza pre avviso. Caratterist iche speciali Sistemi operativi supportati 31 Motherboard Manual SPANISH P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Procesador I ntel Core 2Duo / Penti um 4 / Procesador I ntel Core 2Duo / Penti um 4 / Pentium D / Celeron D / Celer on 4xx hasta Pentium D / Celeron D / Celer on 4xx hasta 3,8 GHz 3,8 GHz *It is recommende d to use processors with *It is recommende d to use processors with CPU 95W power co nsumption. 95W power co nsumption. Admite Hyper -Threadi ng / Bit de Admite Hyper -Threadi ng / Bit de deshabilitación de ejecució n / Intel deshabilitación de ejecució n / Intel SpeedStep® Me jora do / Intel SpeedStep® Me jora do / Intel Architecture-64 / Tecnologí a Extended Architecture-64 / Tecnologí a Extended Memory 64 Memory 64 FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz Conjunto VIA P4M900 VIA P4M890 de chips VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Memoria máxima de ví deo compartida de Memoria máxima de ví deo compartida de 256MB 256MB ITE 8712F ITE 8712F Gráficos Le ofrece las funcionalidades here dadas de Le ofrece las funcionalidades here dadas de Súper E/S uso más común Súper E/S. uso más común Súper E/S. Interfaz de cue nta Low Pin Interfaz de cue nta Low Pin Iniciativas de control de entor no, Iniciativas de control de entor no, Monitor hardware Monitor hardware Controlador de velocida d de ve ntilador Controlador de velocida d de ve ntilador Función "Guardia intelige nte" de I TE Función "Guardia intelige nte" de I TE Ranuras DIMM DDR 2 x 2 Ranuras DIMM DDR 2 x 2 Admite DDR2 de 533 / 667 Admite DDR2 de 533 / 667 Cada DIMM admite DDR de 256MB / 512MB Cada DIMM admite DDR de 256MB / 512MB Memoria /1GB / 2GB /1GB / 2GB principal Capacidad máxima de memoria de 4GB Capacidad máxima de memoria de 4GB Módulo de memoria DDR 2 de canal Se ncillo Módulo de memoria DDR 2 de canal Se ncillo IDE SATA 32 No a dmite DIMM re gistrados o DIMM No a dmite DIMM re gistrados o DIMM compatibles con ECC compatibles con ECC Controlador IDE inte grado Controlador IDE inte grado Modo bus maestro Ultra DMA 33 / 66 / 100 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 / 133 Soporte los Mo dos PIO 0~4, Soporte los Mo dos PIO 0~4, Controlador ATA Serie Integra do Controlador ATA Serie Integra do Tasas de transfere ncia de hasta 1.5 Gb/s. Tasas de transfere ncia de hasta 1.5 Gb/s. Compatible con la versión SATA 1.0. Compatible con la versión SATA 1.0. P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE Red Local Códecs de sonido Ranuras P4M890-M7 FE Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y Negociación de 10 / 100 Mb/s Negociación de 10 / 100 Mb/s Funciones Half / F ull dúplex Funciones Half / F ull dúplex ALC662 ALC662 Soporte de soni do de Alta Defi nición Soporte de soni do de Alta Defi nición Salida de sonido de 5.1 canales Salida de sonido de 5.1 canales Ranura PCI X2 Ranura PCI X2 Ranura PCI Ex press x16 X1 Ranura PCI Ex press x16 X1 Ranura PCI ex press x 1 X1 Ranura PCI ex press x 1 X1 Conector disco flexible X1 Conector disco flexible X1 Conector Puerto de impresora X1 Conector Puerto de impresora X1 Conector IDE X2 Conector IDE X2 Conector SATA X2 Conector SATA X2 Conector de pa nel fro ntal X1 Conector de pa nel fro ntal X1 Conector de sonido frontal X1 Conector de sonido frontal X1 Conector de entra da de C D Conectore Cabecera de ve ntilador de C PU X1 Conector de entra da de C D X1 X1 Cabecera de ve ntilador de C PU X1 s en placa Cabecera de ve ntilador de Cabecera de ve ntilador de sistema X1 sistema Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1 Conector USB X2 Conector USB X2 Conector de alimentación X1 Conector de alimentación X1 (24 patillas) Conector de alimentación X1 (24 patillas) X1 (4 patillas) Conector de alimentación X1 (4 patillas) Teclado PS/2 X1 Teclado PS/2 Ratón PS/2 X1 Ratón PS/2 X1 Puerto serie X1 Puerto serie X1 trasero de Puerto VGA X1 Puerto VGA X1 E/S Puerto de re d local X1 Puerto de re d local X1 Puerto USB X4 Puerto USB X4 Conector de sonido X3 Conector de sonido X3 Panel Tamaño de la placa Funciones especiales Soporte de sistema operativo X1 190mm. (A) X 244 Mm. (H) 190mm. (A) X 244 Mm. (H) Admite RAID 0 / 1 Admite RAID 0 / 1 Windows 2K / XP / VISTA Windows 2K / XP Biostar se reserva el derecho de a ñadir o Biostar se reserva el derecho de a ñadir o retirar el soporte de cualquier SO con o sin retirar el soporte de cualquier SO con o sin aviso previo. aviso previo. 33 Motherboard Manual PORT UGUESE P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Processador Intel Core2Duo / Pe ntium 4 / Processador Intel Core2Duo / Pe ntium 4 / Pentium D / Celero n D / Celer on 4xx até 3,8 Pentium D / Celero n D / Celer on 4xx até 3,8 GHz CPU FSB Chipset Placa gráfica GHz *It is recommende d to use processors with *It is recommende d to use processors with 95W power co nsumption. 95W power co nsumption. Suporta as tecnologias Hyper -Threa ding / Suporta as tecnologias Hyper -Threa ding / Execute Disable Bit / Enha nced I ntel Execute Disable Bit / Enha nced I ntel SpeedStep® / Intel Arquitecture -64 / SpeedStep® / Intel Arquitecture -64 / Extende d Memor y 64 Extende d Memor y 64 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz VIA P4M900 VIA P4M890 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Memória de víde o máxima partilha da: 256 Memória de víde o máxima partilha da: 256 MB MB ITE 8712F ITE 8712F Proporciona as funcionalida des mais Proporciona as funcionalida des mais utilizadas em termos da especificação utilizadas em termos da especificação Especificaç Super I/O. Super I/O. ão Super Interface LPC (Low Pi n Co unt). Interface LPC (Low Pi n Co unt). I/O Iniciativas para control o do am biente Iniciativas para control o do am biente Monitorização do hardware Monitorização do hardware Controlador da velocida de da v entoinha Controlador da velocida de da v entoinha Função "Smart Guardia n" da I TE Função "Smart Guardia n" da I TE Ranhuras DIMM DDR2 x 2 Ranhuras DIMM DDR2 x 2 Suporta mó dulos DDR2 533 / 667 Suporta mó dulos DDR2 533 / 667 Cada mó dulo DIMM suporta uma memória Cada mó dulo DIMM suporta uma memória Memória DDR2 de 256MB / 512 MB / 1 GB / 2GB DDR2 de 256MB / 512 MB / 1 GB / 2GB principal Capacidade máxima de memória : 4 GB Capacidade máxima de memória : 4 GB Módulo de memória DDR2 de canal simples Módulo de memória DDR2 de canal simples IDE SATA Os módulos DIMM r egistados e os DIMM Os módulos DIMM r egistados e os DIMM ECC nã o são suporta dos ECC nã o são suporta dos Controlador IDE inte grado Controlador IDE inte grado Modo Bus master Ultra DMA 33 / 66 / 100 / Modo Bus master Ultra DMA 33 / 66 / 100 / 133 133 Suporta o modo PIO 0~4, Suporta o modo PIO 0~4, Controlador Serial ATA integra do Controlador Serial ATA integra do Velocidades de transmissão de dados até Velocidades de transmissão de dados até 1.5 Gb/s. 1.5 Gb/s. Compatibilidade com a especificação SATA Compatibilidade com a especificação SATA versão 1.0. 34 versão 1.0. P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE P4M890-M7 FE Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y Auto ne gociação de 10 / 100 MB/s Auto ne gociação de 10 / 100 MB/s Capacidade semi/full- duplex Capacidade semi/full- duplex ALC662 ALC662 Codec de Suporta a especificação High-De finition Suporta a especificação High-De finition som Audio Audio LAN PHY Saída de á udio de 5.1 ca nais Ranhuras Saída de á udio de 5.1 ca nais Ranhura PCI x2 Ranhura PCI x2 Ranhura PCI Express x 16 x1 Ranhura PCI Express x 16 x1 Ranhura PCI Express x 1 x1 Ranhura PCI Express x 1 x1 Conector da unida de de disquetes x 1 Conector da unida de de disquetes x 1 Conector da para impressora x1 Conector da para impressora x1 Conector IDE x2 Conector IDE x2 Conector SATA x2 Conector SATA x2 Conector do pai nel fro ntal x1 Conector do pai nel fro ntal x1 Conector de áudio fro ntal x1 Conector de áudio fro ntal x1 Conector para e ntrada de C Ds x1 Conector para e ntrada de C Ds x1 Conectore Conector da ve ntoinha da CPU x1 Conector da ve ntoinha da CPU x1 s na placa Conector da ve ntoinha do sistema Conector da ve ntoinha do x1 Conector para limpeza do CMOS x1 x2 Conector USB x2 Conector de alimentação x1 Conector de alimentação x1 x1 Conector de alimentação (24 pinos) (24 pinos) (4 pi nos) Saídas no painel traseiro Tamanho da pl aca x1 Conector para limpeza do CMOS x1 Conector USB Conector de alimentação Entradas/ sistema x1 (4 pi nos) Teclado PS/2 x1 Teclado PS/2 x1 Rato PS/2 x1 Rato PS/2 x1 Porta série x1 Porta série x1 Porta VGA x1 Porta VGA x1 Porta LAN x1 Porta LAN x1 Porta USB x4 Porta USB x4 Tomada de áudio x3 Tomada de áudio x3 190 mm (L) X 244 mm (A) 190 mm (L) X 244 mm (A) Característ icas Suporta as funções RAID 0 / 1 Suporta as funções RAID 0 / 1 Windows 2K / XP / VISTA Windows 2K / XP especiais Sistemas operativos A Biostar reserva-se o direito de adicionar A Biostar reserva-se o direito de adicionar suportado ou remov er suporte para qualquer sistema ou remov er suporte para qualquer sistema s operativo com ou sem aviso prévio. operativo com ou sem aviso prévio. 35 Motherboard Manual POLISH P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Procesor Intel Cor e2Duo/ Penti um 4 / Procesor Intel Cor e2Duo/ Penti um 4 / Pentium D / Celero n D / Celero n 4xx do 3,8 Pentium D / Celero n D / Celero n 4xx do 3,8 GHz Procesor GHz *It is recommende d to use processors with *It is recommende d to use processors with 95W power co nsumption. 95W power co nsumption. Obsługa Hyper-Threa ding / Exec ute Disable Obsługa Hyper-Threa ding / Exec ute Disable FSB Chipset Grafika Pamięć główna Super I/O IDE SATA 36 Bit / Enhance d I ntel Spee dStep® / Intel Bit / Enhance d I ntel Spee dStep® / Intel Architecture-64 / Exte nde d Memory 64 Architecture-64 / Exte nde d Memory 64 Technol ogy Technol ogy 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz VIA P4M900 VIA P4M890 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Maks. wielkość współdzielonej pamięci Maks. wielkość współdzielonej pamięci video wy nosi 256MB video wy nosi 256MB Gniazda DDR 2 DIMM x 2 Gniazda DDR 2 DIMM x 2 Obsługa DDR2 533 / 667 Obsługa DDR2 533 / 667 Każde gniazdo DIMM obsługuje mo duły Każde gniazdo DIMM obsługuje mo duły 256MB /512MB / 1GB / 2GB DDR2 256MB /512MB / 1GB / 2GB DDR2 Maks. wielkość pamięci 4GB Maks. wielkość pamięci 4GB Moduł pamięci DDR2 z trybem Moduł pamięci DDR2 z trybem poje dynczego kanału poje dynczego kanału Brak obsługi Registered DIMM or az ECC Brak obsługi Registered DIMM or az ECC DIMM DIMM ITE 8712F ITE 8712F Zapewnia najbardziej powszechne funkcje Zapewnia najbardziej powszechne funkcje Super I/O. Super I/O. Interfejs L ow Pin Count Interfejs L ow Pin Count Funkcje kontroli warunków prac y, Funkcje kontroli warunków prac y, Monitor H/W Monitor H/W Kontroler prę dkości wentylatora Kontroler prę dkości wentylatora Funkcja ITE "Smart Guar dian" Funkcja ITE "Smart Guar dian" Zintegrowany kontroler IDE Zintegrowany kontroler IDE Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Master obsługa PIO tryb 0~4, obsługa PIO tryb 0~4, Zintegrowany kontroler Serial ATA Zintegrowany kontroler Serial ATA Transfer da nych do 1.5 Gb/s. Transfer da nych do 1.5 Gb/s. Zgodność ze specyfikacją SATA w wersji Zgodność ze specyfikacją SATA w wersji 1.0. 1.0. P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE P4M890-M7 FE Realtek RTL 8201CL PH Y LAN PHY Kodek dźwiękowy Gniazda Złącza wbudowan e Realtek RTL 8201CL PH Y 10 / 100 Mb/s z automatyczną negocjacją 10 / 100 Mb/s z automatyczną negocjacją szybkości szybkości Działanie w trybie połowicznego / pełnego Działanie w trybie połowicznego / pełnego dupleksu dupleksu ALC662 ALC662 Obsługa Hi gh- Definitio n Audio Obsługa Hi gh- Definitio n Audio 5.1 ka nałowe wy jście audio 5.1 ka nałowe wy jście audio Gniazdo PCI x2 Gniazdo PCI x2 Gniazdo PCI Express x 16 x1 Gniazdo PCI Express x 16 x1 Gniazdo PCI Express x 1 x1 Gniazdo PCI Express x 1 x1 Złącze napędu dyskietek x1 Złącze napędu dyskietek x1 Złącze Port druk arki x1 Złącze Port druk arki x1 Złącze IDE x2 Złącze IDE x2 Złącze SATA x2 Złącze SATA x2 Złącze panela przedniego x1 Złącze panela przedniego x1 Przednie złącze a udio x1 Przednie złącze a udio x1 Złącze wejścia CD x1 Złącze wejścia CD x1 Złącze główkowe wentylatora procesora Złącze główkowe wentylatora x1 Złącze główkowe wentylatora systemowego I/O Wymiary x1 Złącze główkowe wentylatora x1 Złącze główkowe kasowani a Back Panel procesora systemowego x1 Złącze główkowe kasowani a CMOS x1 CMOS Złącze USB x2 Złącze USB x1 x2 Złącze zasilania (24 pi nowe) x1 Złącze zasilania (24 pi nowe) x1 Złącze zasilania (4 pinowe) x1 Złącze zasilania (4 pinowe) x1 Klawiatura PS/2 x1 Klawiatura PS/2 x1 Mysz PS/2 x1 Mysz PS/2 x1 Port szeregowy x1 Port szeregowy x1 Port VGA x1 Port VGA x1 Port LAN x1 Port LAN x1 Port USB x4 Port USB x4 Gniazdo audio x3 Gniazdo audio x3 190 mm (S) X 244 mm (W) 190 mm (S) X 244 mm (W) Obsługa RAID 0 / 1 Obsługa RAID 0 / 1 Obsluga Windows 2K / XP / VISTA Windows 2K / XP systemu Biostar zastrzega sobie prawo do dawania Biostar zastrzega sobie prawo do dawania operacyjn lub o dwoływania obsługi dowolne go lub o dwoływania obsługi dowolne go ego systemu operacyjnego bez powiadomienia. systemu operacyjnego bez powiadomienia. płyty Funkcje specjalne 37 Motherboard Manual RUSSIAN P4M900-M7 FE P4M890-M7 FE LGA 775 Процессор Intel Core 2Duo/ Pe ntium 4 / Pentium D / Celeron D / Celer on 4xx до 3.8 ГГц LGA 775 Процессор Intel Core 2Duo/ Pe ntium 4 / Pentium D / Celeron D / Celer on 4xx до 3.8 ГГц / Execute Disable Bit / Enhance d Intel SpeedStep® / Intel Architecture-64 / Extende d Memor y 64 Technology / Execute Disable Bit / Enhance d Intel SpeedStep® / Intel Architecture-64 / Extende d Memor y 64 Technology CPU (центра льны *It is recommende d to use processors *It is recommende d to use processors й with 95W power consumption. with 95W power consumption. процессор) Подде ржка техноло гий Hy per-Thre ading Подде ржка техноло гий Hy per-Thre ading FSB 533 / 800 / 1066 МГц 533 / 800 / 1066 МГц Набор микросхем VIA P4M900 VIA VT8237A VIA P4M890 VIA VT8237A Графика Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Максимальная совмес тно используемая Максимальная совмес тно используемая Основная память Super I/O IDE SATA 38 видео память составляет 256 МБ Слоты DDR2 DIMM x 2 видео память составляет 256 МБ Слоты DDR2 DIMM x 2 Подде ржка DDR2 533 / 667 Каждый модуль DIMM по ддерж ивае т 256MB / 512МБ / 1ГБ / 2ГБ DDR2 Подде ржка DDR2 533 / 667 Каждый модуль DIMM по ддерж ивае т 256MB / 512МБ / 1ГБ / 2ГБ DDR2 Максимальная ёмк ость памя ти 4 ГБ Модуль памя ти с однока наль ным режимом DDR2 Не подде рживае т за рег истриров анные Максимальная ёмк ость памя ти 4 ГБ Модуль памя ти с однока наль ным режимом DDR2 Не подде рживае т за рег истриров анные модули DIMM and ECC DIMM модули DIMM and ECC DIMM ITE 8712F Обеспечива ет на ибо лее испо льзуемые действ ующие функциона льные возможности Super I/O. ITE 8712F Обеспечива ет на ибо лее испо льзуемые действ ующие функциона льные возможности Super I/O. Инте рфейс с низким к оличеством выводов Инициа тивы по охране ок ружающей Инте рфейс с низким к оличеством выводов Инициа тивы по охране ок ружающей среды, Аппара тный монитор Регуля тор скорости среды, Аппара тный монитор Регуля тор скорости Функция ITE "Smart Guardian" (Интелле ктуа льна я защ ита) Функция ITE "Smart Guardian" (Интелле ктуа льна я защ ита) Встроенное устройств о у прав ления Встроенное устройств о у прав ления встрое нными интерфе йсами устройств встрое нными интерфе йсами устройств Режим "хозяина" ш ины Ultra DMA 33 / 66 Режим "хозяина" ш ины Ultra DMA 33 / 66 / 100 / 133 Подде ржка режима PIO 0~4, / 100 / 133 Подде ржка режима PIO 0~4, Встроенное последов ате льное устройс тво управле ния ATA скорость передач и данных до 1.5 Встроенное последов ате льное устройс тво управле ния ATA скорость передач и данных до 1.5 гига бит/с. Соотве тств ие спецификации SATA версия 1.0. гига бит/с. Соотве тств ие спецификации SATA версия 1.0. P4M900-M7 FE/P4M890-M7 FE Локаль ная сеть Звуково й кодек Слоты P4M900-M7 FE Realtek RTL 8201CL PH Y Автоматическое сог ласова ние 10 / 100 Мб/с Частич ная / полная дуплексна я способнос ть P4M890-M7 FE Realtek RTL 8201CL PH Y Автоматическое сог ласова ние 10 / 100 Мб/с Частич ная / полная дуплексна я способнос ть ALC662 Звукова я поддержка High-De finition 5.1кана льный звуков ой выход Слот PCI x2 Слот PCI Ex press x16 x1 Слот PCI Ex press x 1 x1 ALC662 Звукова я поддержка High-De finition 5.1кана льный звуков ой выход Слот PCI x2 Слот PCI Ex press x16 x1 Слот PCI Ex press x 1 x1 Разъём НГМД x1 Разъём Порт подключе ния принте ра x1 Разъём IDE x2 Разъём SATA x2 Разъём на лицево й пане ли x1 Входно й звук овой раз ъём x1 Разъём вв ода для CD x1 Встроенный Контак тирующее разъём прис пособление ве нтиля тора центра льно го процессора x1 Контак тирующее приспосо бле ние вентиля тора системы x1 Открытое контак тирующее прис пособление CMOS x1 USB-разъём x2 Разъем питания ( 24 вывод) x1 Разъем питания ( 4 вывод) x1 Задняя пане ль средств ввода-выво д а Клавиа тура PS/ 2 Мышь PS/2 Последо вате льный по рт Порт VGA Порт LAN USB-порт Гнездо для по дключ ения наушников x1 x1 x1 x1 x1 x4 x3 Размер 190 мм (Ш ) X 244 мм (В) пане ли Специаль ны е технические Подде ржка RAID 0 / 1 харак терист ики Подде ржка OS Windows 2K / XP / VISTA Biostar сохраня ет за собо й прав о добав лять или уда лять средс тва обеспече ния для OS с или без предварите льно го у ведом ления. Разъём НГМД x1 Разъём Порт подключе ния принте ра x1 Разъём IDE x2 Разъём SATA x2 Разъём на лицево й пане ли x1 Входно й звук овой раз ъём x1 Разъём вв ода для CD x1 Контак тирующее прис пособление ве нтиля тора центра льно го процессора x1 Контак тирующее приспосо бле ние вентиля тора системы x1 Открытое контак тирующее прис пособление CMOS x1 USB-разъём x2 Разъем питания ( 24 вывод) x1 Разъем питания ( 4 вывод) x1 Клавиа тура PS/ 2 Мышь PS/2 Последо вате льный по рт Порт VGA Порт LAN USB-порт Гнездо для по дключ ения наушников x1 x1 x1 x1 x1 x4 x3 190 мм (Ш ) X 244 мм (В) Подде ржка RAID 0 / 1 Windows 2K / XP Biostar сохраня ет за собо й прав о добав лять или уда лять средс тва обеспече ния для OS с или без предварите льно го у ведом ления. 39 Motherboard Manual ARABIC P4M900-M7 FE LGA 775 P4M890-M7 FE LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentiumﻡﻌﺎﻟﺠﺎت Intel Core2Duo/ Pe ntium 4 / Pentiumﻡﻌﺎﻟﺠﺎت ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ D / C eleron D / Celer on 4xx 8.3ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ D / C eleron D / Celer on 4xx 8.3 وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳ ﺔ ﺝﻴﺠﺎ هﺮﺕﺰ ﺝﻴﺠﺎ هﺮﺕﺰ *It is recommended to use processors with *It is recommended to use processors with 95W power co nsumption. 95W power co nsumption. Hyper -Thre ading / Exec ute Disabl eﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت Hyper -Thre ading / Exec ute Disabl eﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت Bit / Enhance d I ntel Spee dStep® / Bit / Enhance d I ntel Spee dStep® / Extende d Memor y 64 Technology Extende d Memor y 64 Technology ﻡﻴﺠﺎ هﺮﺕﺰ 533 / 800 / 1066ﺕﺮدد VIA P4M900 VIA P4M890 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics ﻡﻴﺠﺎ ﺑﺎﻳﺖ256أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ ﻡﻴﺠﺎ ﺑﺎﻳﺖ256أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ ﻓﺘﺤﺔDDR2 DIMM ﻋﺪد2 ﻡﻴﺠﺎ ﺑﺎﻳﺖ 533 / 667ﺳﻌﺎت DDR2ﺕﺪﻋﻢ اﻟﺬاآﺮ ة ﻡﻦ ﻥﻮع اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ ﺳﻌﺔ DDR2ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﺳﻌﺔ DDR2ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﻡﻴﺠﺎ ﺑﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺑﺎﻳﺖ 2 /ﺝﻴﺠﺎ /512ﻡﻴﺠﺎ ﺑﺎﻳﺖ256 ﺑﺎﻳﺖ ﺑﺎﻳﺖ ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 4ﺝﻴﺠﺎ ﺑﺎﻳﺖ ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 4ﺝﻴﺠﺎ ﺑﺎﻳﺖ أﺣﺎدﻳﺔ اﻟﻘﻨﺎة DDR2وﺣﺪة ذا آﺮة أﺣﺎدﻳﺔ اﻟﻘﻨﺎة DDR2وﺣﺪة ذا آﺮة ECCوﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡﻊ DIMMﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة ECCوﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡﻊ DIMMﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة ITE 8712F ITE 8712F اﻷآﺜﺮ اﺳﺘﺨﺪاﻡ ًﺎ Super I /O .ﺕﻮﻓﺮ وﻇﻴﻔ ﺔ اﻷآﺜﺮ اﺳﺘﺨﺪاﻡ ًﺎ Super I /O .ﺕﻮﻓﺮ وﻇﻴﻔﺔ Low Pi n Countﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ SATA Interface Low Pi n Countﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ: وﺳ ﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ: ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣ ﺔ ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣ ﺔ ITEﻡﻦ ""Smart Guar dianوﻇﻴﻔﺔ ITEﻡﻦ ""Smart Guar dianوﻇﻴﻔﺔ ﻡﺘﻜﺎﻡﻞ IDEﻡﺘﺤﻜﻢ ﻡﻨﻔﺬ IDE ﻓﺘﺤﺔDDR2 DIMM ﻋﺪد2 ﻡﻴﺠﺎ ﺑﺎﻳﺖ 533 / 667ﺳﻌﺎت DDR2ﺕﺪﻋﻢ اﻟﺬاآﺮ ة ﻡﻦ ﻥﻮع ﻡﻴﺠﺎ ﺑﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺑﺎﻳﺖ 2 /ﺝﻴﺠﺎ /512ﻡﻴﺠﺎ ﺑﺎﻳﺖ256 Interface Super I/O ﻡﻴﺠﺎ هﺮﺕﺰ 533 / 800 / 1066ﺕﺮدد ﻡﺘﻜﺎﻡﻞ IDEﻡﺘﺤﻜﻢ Ultra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ Ultra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ وﺿﻊ رﺋﻴﺴﻲ وﺿﻊ رﺋﻴﺴﻲ PIO Mode 0~4دﻋﻢ وﺿﻊ PIO Mode 0~4دﻋﻢ وﺿﻊ ﻡﺘﻜﺎﻡﻞ Serial ATAﻡﺘﺤﻜﻢ ﻡﺘﻜﺎﻡﻞ Serial ATAﻡﺘﺤﻜﻢ ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ 1.5ﺝﻴﺠﺎﺑﺖ /ﺙﺎﻥﻴﺔ. ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ 1.5ﺝﻴﺠﺎﺑﺖ /ﺙﺎﻥﻴﺔ. 1.0.اﻹﺹﺪار SATAﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت 1.0.اﻹﺹﺪار SATAﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت 40 P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE ﺵﺒﻜﺔ دا ﺥﻠﻴﺔ آﻮدﻳﻚ اﻟﺼﻮ ت اﻟﻔﺘﺤﺎت اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ اﻟﻠﻮﺣ ﺔ ﻡﻨﺎﻓﺬ دﺥﻞ /ﺥﺮج اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ P4M890-M7 FE Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 100 /10ﻡﻴﺠﺎ ﺑﺎﻳﺖ /ﺙﺎﻥﻴﺔ ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 100 /10ﻡﻴﺠﺎ ﺑﺎﻳﺖ /ﺙﺎﻥﻴﺔ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ ALC662 ALC662 ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ 5.1ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮ ت 5.1ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮ ت ﻓﺘﺤﺔ PCI ﻋﺪد 2 ﻓﺘﺤﺔ PCI ﻋﺪد 2 ﻓﺘﺤﺔ PCI Expressx16 ﻋﺪد 1 ﻓﺘﺤﺔ PCI Expressx16 ﻋﺪد 1 ﻓﺘﺤﺔPCI Express x 1 ﻋﺪد 1 ﻓﺘﺤﺔPCI Express x 1 ﻋﺪد 1 ﻡﻨﻔ ﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻋﺪد 1 ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻋﺪد 1 ﻋﺪد 1 ﻡﻨﻔﺬIDE ﻋﺪد 2 ﻡﻨﻔﺬIDE ﻋﺪد 2 ﻡﻨﻔﺬSATA ﻋﺪد 2 ﻡﻨﻔﺬSATA ﻋﺪد 2 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻡﻨﻔﺬCD-IN ﻋﺪد 1 ﻡﻨﻔﺬCD-IN ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢCMOS ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢCMOS ﻋﺪد 1 ﻡﻨﻔﺬUSB ﻋﺪد 2 ﻡﻨﻔﺬUSB ﻋﺪد 2 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )24دﺑﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )24دﺑﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 4دﺑﺎﺑﻴﺲ( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 4دﺑﺎﺑﻴﺲ( ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢPS/2 ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢPS/2 ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ ﻋﺪد 1 ﻡﻨﻔﺬ VGA ﻋﺪد 1 ﻡﻨﻔﺬ VGA ﻋﺪد 1 ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤ ﻠﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ ﻋﺪد 1 ﻡﻨﺎﻓﺬ USB ﻋﺪد 4 ﻡﻨﺎﻓﺬ USB ﻋﺪد 4 ﻡﻘﺒﺲ ﺹﻮت ﻋﺪد3 ﻡﻘﺒﺲ ﺹﻮت ﻋﺪد3 ﺣﺠﻢ اﻟﻠﻮﺣﺔ 190ﻡﻢ )ﻋﺮض ( 244 Xﻡﻢ ) ارﺕﻔﺎع( 190ﻡﻢ )ﻋﺮض ( 244 Xﻡﻢ ) ارﺕﻔﺎع( ﻣﺰاﻳﺎ ﺧﺎﺻﺔ RAID 0 / 1ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ RAID 0 / 1ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ 41 Windows 2K / XP / VISTA Windows 2K / XP ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم Biostarﺕﺤﺘﻔﻆ ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم Biostarﺕﺤﺘﻔﻆ ﺕﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ﺑﺪون إﺥﻄﺎر . ﺕﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ﺑﺪون إﺥﻄﺎر . Motherboard Manual JAPANESE P4M900-M7 FE P4M890-M7 FE LGA 775 LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / Intel Core2Duo/ Pe ntium 4 / Pentium D / Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.8 GHz CPU FSB 95W power co nsumption. 95W power co nsumption. Hyper -Thre ading / Exec ute Disabl e Bit / Hyper -Thre ading / Exec ute Disabl e Bit / Enha nced Intel SpeedStep® / I ntel Enha nced Intel SpeedStep® / I ntel Architecture-64 / Exte nde d Memory 64 Architecture-64 / Exte nde d Memory 64 Technol ogy をサポートします Technol ogy をサポートします 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz チップセッ VIA P4M900 ト GHz *It is recommende d to use processors with *It is recommende d to use processors with VIA VT8237A VIA P4M890 VIA VT8237A グラフィッ Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics クス 最大の共有ビデオメモリは256MBです 最大の共有ビデオメモリは256MBです DDR2 DIMMスロット x 2 DDR2 DIMMスロット x 2 DDR2 533 / 667をサポート DDR2 533 / 667をサポート 各DIMMは 256/ 512MB/1GB/ 2GB DDR2をサ 各DIMMは 256/ 512MB/1GB/ 2GB DDR2をサ メインメモ リ Super I/O IDE SATA 42 ポート ポート 最大メモリ容量4GB 最大メモリ容量4GB シングル チャンネルモードDDR 2メモリモジュ シングル チャンネルモードDDR 2メモリモジュ ール ール 登録済みDIMMとECC DIMMはサポートされま 登録済みDIMMとECC DIMMはサポートされま せん せん ITE 8712F ITE 8712F もっとも一般に使用されるレガシーSuper I/O もっとも一般に使用されるレガシーSuper I/O 機能を採用しています。 機能を採用しています。 低ピンカウントインターフェイス 低ピンカウントインターフェイス 環境コントロールイニシアチブ、 環境コントロールイニシアチブ、 H/Wモニター H/Wモニター ファン速度コントローラ/ モニター ファン速度コントローラ/ モニター ITEの「スマートガーディアン」機能 ITEの「スマートガーディアン」機能 統合IDEコントローラ 統合IDEコントローラ Ultra DMA 33 / 66 / 100 / 133バスマスタモー Ultra DMA 33 / 66 / 100 / 133バスマスタモー ド ド PIO Mode 0~4のサポート PIO Mode 0~4のサポート 統合シリアルATAコントローラ 統合シリアルATAコントローラ 最高1.5 Gb/秒のデータ転送速度 最高1.5 Gb/秒のデータ転送速度 SATAバージョン1.0仕様に準拠。 SATAバージョン1.0仕様に準拠。 P4M900-M7 FE/P4M890-M7 FE P4M900-M7 FE LAN PHY サウンド Codec スロット オンボード コネクタ 背面パネル I/O ボードサイ ズ 特殊機能 OSサポー ト P4M890-M7 FE Realtek RTL 8201CL PH Y Realtek RTL 8201CL PH Y 10 / 100 Mb/秒のオートネゴシエーション 10 / 100 Mb/秒のオートネゴシエーション 半/全二重機能 半/全二重機能 ALC662 ALC662 ハイデフィニションオーディオのサポート ハイデフィニションオーディオのサポート 5.1 チャンネルオーディオアウト 5.1 チャンネルオーディオアウト PCIスロット x2 PCIスロット x2 PCI Expr ess x16スロット x1 PCI Expr ess x16スロット x1 PCI Expr ess x 1スロット x1 PCI Expr ess x 1スロット x1 フロッピーコネクタ x1 フロッピーコネクタ x1 プリンタポートコネクタ x1 プリンタポートコネクタ x1 IDEコネクタ x2 IDEコネクタ x2 SATAコネクタ x2 SATAコネクタ x2 フロントパネルコネクタ x1 フロントパネルコネクタ x1 フロントオーディオコネクタ x1 フロントオーディオコネクタ x1 CDインコネクタ x1 CDインコネクタ x1 CPUファンヘッダ x1 CPUファンヘッダ x1 システムファンヘッダ x1 システムファンヘッダ x1 CMOSクリアヘッダ x1 CMOSクリアヘッダ x1 USBコネクタ x2 USBコネクタ x2 電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1 電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1 PS/2キーボード x1 PS/2キーボード x1 PS/2マウス x1 PS/2マウス x1 シリアルポート x1 シリアルポート x1 VGAポート x1 VGAポート x1 LANポート x1 LANポート x1 USBポート x4 USBポート x4 オーディオジャック x3 オーディオジャック x3 190 mm (幅) X 244 mm (高さ) 190 mm (幅) X 244 mm (高さ) RAID 0 / 1のサポート RAID 0 / 1のサポート Windows 2K / XP / VISTA Windows 2K / XP Biostarは事前のサポートなしにOSサポートを Biostarは事前のサポートなしにOSサポートを 追加または削除する権利を留保します。 追加または削除する権利を留保します。 2008/04/07 43