Download Owners Manual - ESD

04 Interior
Cargo area
Safety net*
Removing the safety net
Load retaining eyelets*
1. Slacken the tension from the straps.
2. Undo the hooks from the eyes at the seatbelt floor mounting on both sides.
3. Detach the net from the mounting points in
the roof panels.
4. Fold up the safety net and store it in the
bag.
WARNING
Loads in the cargo area must be firmly
secured even if the safety net is correctly
fitted.
The safety net is located behind the front seat
backrests. The safety net is only designed for
use when the rear seat backrests are lowered.
For securing loads, see page 181.
Attaching the safety net
1. Fold down the backrests on both sides,
see page 114.
2. Secure the safety net in the roof panel
mountings.
3. Secure the hooks in the eyes at the seatbelt
floor mounting on both sides.
4. Stretch the straps if necessary.
5. Check all mountings.
118
* Option/accessory, for more information, see Introduction.
G007602
G007603
04
The load retaining eyelets are used to fasten
straps or nets to anchor items in the cargo
area.
There are two further eyelets on each side by
the seatbelt slide rail that can be used when
securing loads when the safety net is not in
use.
For securing loads, see page 181.