Download Rack Automatic Transfer Switch Online User's Guide
Transcript
Automatic Transfer Switch Settings Configuring load thresholds Web interface. Automatic Transfer Switch USER’S GUIDE 1 . Select the Unit tab from the navigation menu. Then select load, under Configuration in the left navigation menu. 2 . Set the thresholds for total current or each bank. The configurable thresholds are Overload Alarm Threshold, Near Overload Warning Threshold, and Low Load Warning Threshold for each bank. 3 . Click Apply to save your changes or Cancel to exit without saving the changes. Control console. 1 . From the Device Manager menu, select Load Management. 2 . Select a threshold to configure–Overload Alarm Threshold (amps), Near Overload Warning Threshold (amps), or Low Load Warning Threshold (amps). 3 . Select Accept Changes. Setting Description Overload Alarm Threshold Set the overload threshold, in amps, for the current drawn from this bank during normal operation. A load at or higher than this level generates a warning. Near Overload Warning Threshold Set the number of amps at which to generate an alarm that the Rack ATS is nearing overload of a bank. Low Load Warning Threshold Set the low threshold, in amps, for the current drawn from this bank during normal operation. A load at or below this level generates a warning. ® 34