Download MAUS Analysis User System User Guide

Chapter 8
Field Properties
Invoke a field using PropertyString FieldType <fieldtype>. The field will be
placed, normally centred on the MiceModule Position and with the appropriate
Rotation. Further options for each field type are specified below, and relevant
datacards are also given. If a fieldtype is specified some other properties must
also be specified, while others may be optional, usually taking their value from
defaults specified in the datacards. Only one fieldtype can be specified per module. However, fields from multiple modules are superimposed, each transformed
according to the MiceModule specification. This enables many different field
configurations to be simulated using MAUS.
To use BeamTools fields, datacard FieldMode Full must be set. This is the
default.
Property
FieldType
8.0.1
Type
string
Description
Set the field type of the MiceModule.
FieldType CylindricalField
Sets a constant magnetic field in a cylindrical region symmetric about the z-axis
of the module.
Property
ConstantField
Length
FieldRadius
8.0.2
Type
Hep3
Vector
double
double
Description
The magnetic field that will be placed in the region.
The physical extent of the region.
FieldType RectangularField
Sets a constant magnetic field in a rectangular region.
Property
ConstantField
Length
Width
Height
Type
Hep3
Vector
double
double
double
Description
The magnetic field that will be placed in the region.
The physical extent of the region.
62