Download QNAP2 version 9.3 User's Guide

Transcript
3
the condence intervals with the regeneration method). If this assumption is not veried the
produced condence intervals may be meaningless.
CORRELATION = ALL QUEUE, ALL CLASS means that the functions have to be
computed for all the stations and all the classes of the network.
CORRELATION = NIL means that no correlation is required (default value).
The computation of the correlation function is performed for the stations and classes specied by the queue sublist and class sublist expressions. The elements (queue, class) appearing
in the parameter CORRELATION must also be specied in the parameter ACCURACY. The
maximum order of the auto-correlation function may be specied by the integer expression (the
default value for this order is 5).
The sublist and integer expressions are evaluated at initiation time. The CORRELATION
parameter may only be used with the regeneration method (ESTIMATION = REGEN).
3.8.14 PERIOD parameter
Syntax:
period parameter !
PERIOD
= real ;
Semantics:
The PERIOD parameter determines the activation period of the test sequence (see TEST
parameter) This period may be determined by a constant or by an expression which is evaluated
at initiation time.
If PERIOD = 0. is specied then the test sequence is activated at each instant corresponding to an event during the simulation run. Therefore, it is possible to permanently
test the model state (active wait) and to perform some operations if the model is in some
determined states. It should be noted that this mechanism is costly and therefore should
only be used if expressly required.
There is no default value for the parameter PERIOD. If the parameter has not been
dened the test sequence, if any, is not activated.
PERIOD = ; cancels any previous denition of PERIOD.
3.8.15 TEST parameter
Syntax:
test parameter !
TEST
= statement ;
Semantics:
The TEST parameter is used to specify a statement to be executed, during a simulation
run, at the end of each interval determined by the PERIOD parameter.
In a test sequence the user may, for instance:
dene regeneration points using the SAMPLE procedure in order to split the simulation
duration into independent xed or variable length intervals as required by the regeneration
method.
print the results obtained for each station during the current period by using for example
the OUTPUT procedure and therefore keep track of the station behaviour during the
simulation.
User's Guide
Control Language 103