Download QNAP2 version 9.3 User's Guide
Transcript
3 the condence intervals with the regeneration method). If this assumption is not veried the produced condence intervals may be meaningless. CORRELATION = ALL QUEUE, ALL CLASS means that the functions have to be computed for all the stations and all the classes of the network. CORRELATION = NIL means that no correlation is required (default value). The computation of the correlation function is performed for the stations and classes specied by the queue sublist and class sublist expressions. The elements (queue, class) appearing in the parameter CORRELATION must also be specied in the parameter ACCURACY. The maximum order of the auto-correlation function may be specied by the integer expression (the default value for this order is 5). The sublist and integer expressions are evaluated at initiation time. The CORRELATION parameter may only be used with the regeneration method (ESTIMATION = REGEN). 3.8.14 PERIOD parameter Syntax: period parameter ! PERIOD = real ; Semantics: The PERIOD parameter determines the activation period of the test sequence (see TEST parameter) This period may be determined by a constant or by an expression which is evaluated at initiation time. If PERIOD = 0. is specied then the test sequence is activated at each instant corresponding to an event during the simulation run. Therefore, it is possible to permanently test the model state (active wait) and to perform some operations if the model is in some determined states. It should be noted that this mechanism is costly and therefore should only be used if expressly required. There is no default value for the parameter PERIOD. If the parameter has not been dened the test sequence, if any, is not activated. PERIOD = ; cancels any previous denition of PERIOD. 3.8.15 TEST parameter Syntax: test parameter ! TEST = statement ; Semantics: The TEST parameter is used to specify a statement to be executed, during a simulation run, at the end of each interval determined by the PERIOD parameter. In a test sequence the user may, for instance: dene regeneration points using the SAMPLE procedure in order to split the simulation duration into independent xed or variable length intervals as required by the regeneration method. print the results obtained for each station during the current period by using for example the OUTPUT procedure and therefore keep track of the station behaviour during the simulation. User's Guide Control Language 103