Download User Guide - Wolf Laboratories

Setup and Initial Operation
The unit does not emit harmful substances either during operation or when switched off.
Symbols on the unit and its serial number plate meet the requirements of the following standards: DIN
EN 61010-1, DIN EN 61010-2-101, DIN EN 61326, DIN EN 62304, DIN EN 62366, DIN EN 591, DIN
EN 375 and DIN EN 980 (harmonized standard for medical devices according to § 3 No. 17 of the
German Medical Device Law MPG).
Regarding the checking of meters, please refer to the applicable laboratory guidelines in this regard.
5.2 Known Risks during Use
An acid buffer and a stabilizer solution are used during measurement. Make sure you read the
attached safety data sheets concerning appropriate safety measures and handling of these solutions.
Setup and Initial Operation | 13