Download User Guide - MS (Distribution) UK Ltd.

CAMBIUM NETWORKS
AP Traceroute page
Use the AP Traceroute page to display the route (path) and associated diagnostics for IP
connectivity between the AP and the destination specified.
Figure 32 AP Traceroute page
Table 51 AP Traceroute attributes
Attribute
Meaning
IP Address
Enter the IP address of the target of the traceroute diagnostic
Fragmentation (-F)
ON: Allow source and target to fragment probe packets
OFF: Do not fragment probe packets (on source or target)
Trace method (-l)
ICMP ECHO: Use ICMP ECHO for traceroute probes
UDP: Use UDP for traceroute probes
Display TTL (-l)
ON: Display TTL values for each hop on the route
OFF: Suppress display of TTL values for each hop on the route
Verbose (-v)
ON: ICMP packets other than TIME_EXCEEDED and UNREACHABLE are
displayed in the output
OFF: Suppress display of extraneous ICMP messaging
121