Download Model 4101 Chart recorder User Guide - E

100 MM RECORDER USER GUIDE
Continuous-trace recorder
Multi-point recorder
Line input: 90 to 264V at 45 to 65 Hz
OR, if Low Voltage Option fitted,
20 to 53V dc or ac (45 to 400 Hz RMS)
Line input: 90 to 264V at 45 to 65 Hz
OR, if Low Voltage Option fitted,
20 to 53V dc or ac (45 to 400 Hz RMS)
Safety cover not shown
Earth Line Neutral for clarity
(DC+) (DC-)
DC polarity not important,
but + terminal is fused
Safety cover not shown
Earth Line Neutral for clarity
(DC+) (DC-)
DC polarity not important,
but + terminal is fused
Option board(s)
Option board(s)
Option board(s)
Option board(s)
Input board
Input board
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
V+ V- I
V+ V- I V+ V- I V+ V- I
V+ V- I V+ V- I V+ V- I
Ch1
Ch2
Ch3
Ch1
Ch4
Ch2
V+ V- I V+ V- I V+ V- I
Ch3
Ch4
Ch5
Ch6
Signal wiring
V+ V- I
V+ V- I
V+ V- I
Shunt
assembly
+
Attenuator
assembly
+
+
DC V (-2V < Vin < 10V)
DC mV
Thermocouples
DC mA
V+ V- I
V+ V- I
V+ V- I
2-wire resistance
thermometer
Potentiometer
3-wire resistance
thermometer
DC V
( 20V to +100V)
Resistance inputs not available at channel 1, if any other channel is a thermocouple input
Wire sizes:
Power: 0.5 mm2 (min)
Signal: 2.5 mm2 (max)
Figure 2.2 Electrical Installation
Page 6
HA249873
Issue 8 Oct 99