Download Operating Instructions VEGAPULS SR 68

Quick start
Quick start
Mounting
The quick start procedure enables a quick setup with many applications. You can find further information in the respective chapters of the
operating instructions manual.
1. Distance from the vessel wall > 200 mm, the antenna should
protrude > 10 mm into the vessel
ca. 10 mm
200 mm
(7.87")
Fig. 1: Distance of the antenna to the vessel wall/vessel ceiling
2. Note min. socket diameter depending on the socket length
3. Note the instructions for sealing
Electrical connection
For further information see chapter "Mounting".
1. Make sure that the power supply corresponds to the specifications on the type label.
2. Connect the instrument according to the following illustration
2
3
4...20mA
(+)1
2(-)
5
6
7
8
4
1
Fig. 2: Electronics and connection compartment, single chamber housing
1
2
3
4
Set parameters
Voltage supply, signal output
For display and adjustment module or interface adapter
For external display and adjustment unit
Ground terminal for connection of the cable screen
See also chapter "Connecting to power supply"
1. Go via the display and adjustment module to the menu "Setup".
2
VEGAPULS SR 68 • 4 … 20 mA/HART two-wire
38294-EN-130624
2. Select in the menu item "Medium" the medium of your application, for example "Powder/Dust".