Download Operating instructions - Outside Catering Hire
Transcript
Operating instructions for Winterhalter Gastronom dishwasher GS 502 and GS 515 Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Page Intended use .................................................................................................................... 1 Installation and commissioning ....................................................................................... 1 Safety instructions ........................................................................................................... 2 Operating panel ............................................................................................................... 3 Functions of the dishwasher ............................................................................................ 4 Wash programmes .......................................................................................................... 4 Before washing ................................................................................................................ 5 Detergent dosage ............................................................................................................. 6 Changing the detergent type ............................................................................................ 6 Washing ........................................................................................................................... 7 Wash pause...................................................................................................................... 7 Changing from normal programme to special programmes............................................. 8 Short programme or intensive programme ...................................................................... 8 Programmes with reduced rinse temperature ................................................................. 9 Changing the programme setting ..................................................................................... 10 Changing between special programmes .......................................................................... 10 Changing from special programme to normal programme............................................... 10 Cancelling programme selection ...................................................................................... 10 After washing.................................................................................................................... 11 Draining tank / self cleaning ............................................................................................. 11 Switching off .................................................................................................................... 12 Maintenance and care ..................................................................................................... 13 Descaling .......................................................................................................................... 14 Faults ................................................................................................................................ 15 Emission values................................................................................................................ 16 89005779 GB Operating instructions For Winterhalter Gastronom Dishwasher GS 502 and GS 515 These operating instructions must always be kept within easy reach of the dishwasher. Failure to observe this sign can lead to danger to life. Failure to observe this sign can lead to damage to the dishwasher. This sign indicates that the use of high pressure cleaners or steam jet cleaners is prohibited. This sign indicates recommendations and special features. 1 Intended use The Winterhalter Gastronom dishwasher GS 502/GS 515 may only be used for washing items from the catering industry and related trades. Any change in design or use of the dishwasher carried out without the written permission of Winterhalter Gastronom GmbH, leads to the guarantee and product liability becoming null and void. If damage is caused to the dishwasher due to failure to observe the instructions given in this manual, no claims under guarantee can be made to Winterhalter Gastronom GmbH or any associated companies. 2 Installation and commissioning Installation of the dishwasher and connection to the customer’s water inlet, waste water drainage and electricity connections are to be carried out in accordance with national and local criteria by qualified engineers in accordance with the “Installation instructions for Winterhalter Gastronom dishwashers“. Main fuses and main switch to be provided by customer. After proper connection to the customer’s water and electricity connections, contact the Winterhalter works representative for your area. Commissioning (so-called washing in) and instruction in operating the dishwasher is to be carried out by the Winterhalter customer service. For this purpose, use the “Commissioning regulation for Winterhalter Gastronom dishwasher GS 502/GS 515”. 89005779 1 3 Safety instructions • The dishwasher may only be used once the operating instructions have been read and understood. The operator has receive instruction in the operation and functions of the machine from a Winterhalter customer service representative. • Only operate the dishwasher in the manner described in this manual. • In the event of danger or faults, switch the dishwasher off immediately. Switch off customer’s main switch. Only then is the dishwasher safe. • Do not open any machine casings or machine parts if tools are necessary to do so. • Work on the electrical equipment is only to be carried out by specialist personnel. First disconnect the dishwasher from the mains. • As an option, the dishwasher can be fitted with an automatic hood opening system: the hood opens automatically at the end of the programme. Warning! Keep head or chin away from top of hood and handles. Note! Do not place any articles such as towels, equipment, dishes or racks on the hood or hang them on the handles. Otherwise correct functioning of the hood opening is not guaranteed. • The water in the dishwasher is not drinking water. • In the event of faults which are not due to the customer’s water or electricity supply, contact the Winterhalter customer services department. • In the event of a fault of which the cause is unknown, do not switch the dishwasher on again until the cause has been established. If necessary, contact the Winterhalter customer services department • Only use detergent and rinse additive which are suitable for industrial dishwashers. We recommend the products developed by Winterhalter Gastronom. These are specially developed to suit Winterhalter Gastronom dishwashers. All quantities given refer to Winterhalter Gastronom products. Observe danger instructions printed on packaging. • During daily cleaning, make sure that no rusting foreign bodies remain inside the dishwasher. This can cause the interior to rust. The rust particles may come from non-stainless items washed, cleaning aids, damaged wire trays or baskets or from supply lines which have not been rust proofed. • Leave the hood open until the next time you put the machine into operation, so that the inside of the machine can dry out. This is important for long-lasting protection against corrosion, even with high grade stainless steel. • Protect the dishwasher against frost. Systems carrying water can be damaged if they freeze. • Do not use normal washing-up liquid. This leads to large amounts of foam building up in the dishwasher. 2 89005779 • The dishwasher is hoseproof. However, do not spray the outside with a high pressure or steam jet cleaner. • Check the required FI-residual current operated device for faults regularly according to the regulations by pressing the test button. • In addition to daily cleaning, we recommend that you have the dishwasher serviced at least twice a year by a Winterhalter customer service engineer. GB 4 Operating panel The operating panel is situated in the upper part of the hood. & DOS 1 2 3 4 5 6 7 8 9 10 11 12 13 1 On/Off switch 8 Temperature display - Tank 2 Tank drainage / Self cleaning 9 Activate special programmes (10-12) 3 Control lamp for fault 10 Short programme 4 Control lamp for lack of detergent or rinse additive (optional) 11 Reduced rinse temperature (optional) 5 Control lamp for connected water treatment (optional) 12 Intensive programme 6 Programme button normal programme 13 Button area for special programmes 7 Temperature display – Boiler 89005779 3 5 Functions of the dishwasher After the machine is switched on, the dishwasher heats up the water in the boiler. During this heating up phase, the tank is filled in stages with water which is heated simultaneously. The programme button (6) is lit red during the heating up phase. As soon as the pre-set target temperatures for the boiler and tank have been reached, the dishwasher is ready for operation. The programme button (6) is now lit green. The dishwasher is fitted with an automatic hood start. When closing the hood, the last selected wash programme starts automatically. When the hood is opened, the pre-set wash programme remains stored. Thus operation can continue immediately with the pre-set wash programme. An automatic hood opening system is available as a cost option. With this machine version, the hood opens automatically at the end of the programme. The hood is closed manually. The container for rinse additive is stored separately from the dishwasher. Dosage for the rinse additive is controlled automatically by the dishwasher. Detergent must be added by hand (in the form of powder) or by means of a dosing pump in the case of liquid detergent. 6 Wash programmes The dishwasher can be operated with various wash programmes. The individual programmes are selected by means of the control panel. Programme Description Normal programme (6) Normally soiled items Medium drying time Short programme (10) Lightly soiled items. Short/no drying time Intensive programme (12) Heavily soiled items. Long drying time 3 programmes with reduced rinse temperature (optional) For washing glasses Programme duration: according to selected wash programme Tank drainage / self-cleaning (2) Cleaning of the machine The waste water is automatically pumped off. When the cleaning programme is finished, the dishwasher switches off automatically. 4 89005779 7 Before washing Turn water stop valve to open position. Switch on customer’s main switch. GB Check level in rinse additive container and detergent container (only with automatic detergent dosage). Replace or fill up empty containers. Observe safety instructions on packaging. Check whether drainage filter, pump suction filter, basket filter and flat filter are installed. Do not load dishes at this stage. Ensure Hood is Closed. Press On/Off switch (1), heating up phase begins. Programme button up. is lit red: Boiler and tank are both filled and heated Programme button is lit green: Filling and heating up phase completed. Hood must remain closed during filling / heating up. Open hood. 89005779 5 = Detergent dosage If the dishwasher is fitted with a built-in or external detergent dosing pump, there is no need for manual dosing. In this case, detergent dosing is carried out automatically by the dishwasher. With an external detergent dosing pump, please observe the operating instructions supplied with it. Manual detergent pre-dosage: Pour detergent powder into basket filter with cup. Dosage: Approx. 120g We recommend Winterhalter Gastronom detergent powder. Observe the recommended dosage printed on the instruction label. Observe safety instructions on the detergent packaging. Close hood. Start normal programme. For this, press button (6). Detergent powder is mixed with wash water. The dishwasher is now ready for operation. Manual addition of detergent : Manual addition of the detergent powder must be repeated after approx. every 5 wash cycles. Pour 60g of detergent powder into the basket filter. Then start the wash programme. = Changing the detergent type (liquid product) If changing to a different detergent type (even one by the same manufacturer), you must rinse the suction and pressure hoses with fresh water before connecting the new detergent container. Otherwise, the mixing of different types of detergent will cause crystallisation, which may result in a breakdown of the dosing pump. Failure to observe this rule will lead to the loss of guarantee and product liability claims vis-à-vis Winterhalter Gastronom GmbH. Procedure: • Remove the suction stick from the empty detergent container and place it in a container filled with fresh water. • Drain the machine completely and refill it. Then drain it again, since no detergent has been dispensed during this process. • Insert the suction stick in the new detergent container. 6 89005779 8 Washing Pre-clean dishes (if necessary pre-wash with spraying nozzle), place in wash rack: Upper surface of plate or tray facing forward. GB Cups and glasses, facing down. Insert cutlery in one layer only . Close hood. Select wash programme: Press programme button (6), wash programme starts. Programme button (6) is lit blue. Programme button (6) is lit green: Wash programme completed Open hood or wait for automatic hood opening (OPTION). Remove rack. • After the first wash cycle, each further wash cycle is triggered by closing the hood. • Check basket filter for blockages and clean if necessary. The basket filter can be removed without having to drain the tank first. • Check tank water for soiling. If necessary, drain and re-fill machine. = Wash pause Before closing the hood, press function button in order to cancel automatic hood start. Close hood. 89005779 7 9 Changing from normal programme to special programmes Before changing from normal programme to special programmes (short programme, intensive programme or programmes with reduced rinse temperature), the button area with the special programmes must first be activated. To do this, press function button & The button area with the special programmes is activated. Close hood • Short programme or intensive programme Depending on the level of soiling on the wash items, select one of the two special programmes: Short prog.: Press and or Intensive prog.: Press and & Example: Operating panel display during wash cycle with short programme selected. Button & is lit blue. Operating panel at end of programme Button is lit green. Open hood or wait for automatic hood opening (OPTION). Remove dish rack 8 89005779 • Programmes with reduced rinse temperature (optional) The first rinse cycle with reduced rinse temperature is carried out with the high rinse temperature of the wash programme set previously. Condition for continued operation: The button area with the special programmes has been activated (buttons 10, 11 and 12 are lit), the dishes are in the machine and the hood is closed. Press Function button & GB Select one of the 3 wash programmes: Normal prog. with reduced rinse temperature: press or Short prog. with reduced rinse temperature: press and or Intensive prog. with reduced rinse temperature: press & Function button and Operating panel display for programme end (with pre-set normal programme) flashes until another programme is selected. Open hood or wait for automatic hood opening (OPTION). Remove dish rack • After first selection and start of the wash programme, each further start is triggered by closing the hood. • Check basket filter for blockage and clean if necessary. Basket filter can be removed without having to drain tank first. • Check tank water for soiling. If necessary, drain and re-fill machine. • Switching between special programmes: see section 10 “Changing the programme setting“ 89005779 9 10 Changing the programme setting Changing the programme setting for the special programmes and for the normal programme can be carried out with the hood open or closed (if the automatic hood start is inactive). = Changing between the special programmes Select desired programme (press button). The previously selected programme is thus cancelled. Close hood. Press programme button. = Changing from special programme to normal programme Press function button The button area with the special programmes is no longer lit. Close hood. Press programme button. Normal programme starts. = Cancelling the programme selection Press function button Close hood. 10 89005779 11 After washing = Tank drainage / self-cleaning With the cleaning programme, the interior of the dishwasher is cleaned. The dirty wash water is pumped off. The dishwasher switches off automatically after the cleaning programme has finished. Close hood. GB & & Hold down function button seconds. Operating panel display during the cleaning programme. Button C for 2 flashes Operating panel display at end of programme. Open hood or wait for automatic hood opening (OPTION). Remove and clean basket filter. Remove and clean flat filter. 89005779 11 Remove and clean drainage filter. Insert the parts removed again after cleaning. • Leave hood open. In this way the interior can dry out. • Clean the outer walls of the dishwasher with cleaning products for high grade stainless steel. We recommend Winterhalter Gastronom high grade stainless steel cleaner and Winterhalter high grade stainless steel protection. = Switching off After the cleaning programme has finished, the control of the dishwasher is switched off. The machine is not yet safe, however. Turn water stop valve to closed position. Switch off customer’s main switch. Now the machine is safe. 12 89005779 12 Maintenance and care Open hood. GB Remove and clean basket filter. Remove and clean flat filter. Fold up or remove rack carrier. Remove wash arms and check jets for blockages, clean if necessary. Remove drainage and pump suction filter, check for blockages and clean if necessary. Free machine interior from food remains e.g. with a brush. Insert filters and wash arms again. • 89005779 Clean the outer walls of the dishwasher with special cleaning products for high grade stainless steel. We recommend Winterhalter Gastronom high grade stainless steel cleaner and Winterhalter high grade stainless steel protection. 13 = Descaling Drain machine. Interrupt detergent supply: Remove suction pipe from the detergent canister. Re-fill machine. Addition of the descaling solution according to manufacturer’s instructions. Observe the printed safety instructions. Trigger intensive programme once or twice (max. 10 minutes circulation). This loosens the coating of scale. Drain machine. Never leave the descaling solution in the machine for a period of several hours. Put detergent supply into operation again. Re-fill machine. Operate machine twice more in intensive programme mode. Drain machine or use for the current wash programme. 14 89005779 13 Faults 13.1 Faults where it is not necessary to call Winterhalter Services You can rectify minor faults yourself following the steps described in the table below. If you are unable to rectify the fault, contact Winterhalter service. Do not open any panels or expose any parts of the machine if tools are necessary to do so. Risk of electric shock. Work on the electrical equipment is only to be carried out by specialist personnel. First disconnect the washer from the mains. Do not switch the washer on again until the cause of the fault has been identified. Turn off the main switch on the machine. The dishwasher is then isolated from the power supply. Display The washer cannot be switched on Cause Remedy Main switch on the machine is not switched on Switch on the customer’s main switch Customer’s fuses blown Replace the customer’s fuses Wash programHood is not completely closed me does not start Dishes are not clean GB Close hood completely. Press hood down onto hood catch Too low dosage of detergent or detergent container empty Fill up detergent container or add detergent powder Basket filter and/or flat filter blocked Clean basket filter and flat filter Wash jets in the wash arms blocked Clean wash jets Functional fault in the water treatment Call Winterhalter service engineer Turn off the dishwasher (Pres the on-off switch). Then the display should show Err and a fault code. Display shows Water stop valve closed Malfunction Button is flashing blue If the dishes have not been sufficiently pre-cleaned, so much dirt may have accumulated on the flat filter and the cartridge filter that the wash programme's operation is interrupted. The wash pump turns itself off and the programme button flashes blue. 89005779 Open the water stop valve and turn the machine on again. If the fault message reappears, note the fault code and contact Winterhalter Service. • Turn off the machine, the programme button continues to flash. • Remove the filters, clean and replace. • After 2 minutes the flashing will stop. Turn the machine on again and continue to use. • In order to avoid further problems please ensure better pre-cleaning. 15 13.2 Error alarms in machines with optional extras DOS Lack of detergent or rinse additive Re-fill detergent or rinse additive Fault in the online water treatment plant Read the relevant manual 13.3 Faults where it is necessary to call Winterhalter Service • Red flashing light: Temperature in boiler or tank is greater than 95°C. Caution: Surface is very hot. The fault (3) symbol appears together with the fault code Err 2 or Err 3. Switch off main switch. Notify the Winterhalter service team immediately. When the machine can no longer be used because of internal faults, the machine turns itself off automatically and displays an error code Display Machine shuts down and displays Err 1; 11; 12 Machine shuts down and no longer displays anything Possible Cause Remedy Internal fault Inform Winterhalter Service Internal fault Inform Winterhalter Service 14 Emission values Noise emission values The workplace related emission value is <70dB(A) 16 89005779