Transcript
Installation Manual for Toilet Seat and Cover NB: This Installation manual is for the installer and must be followed in order for the seat to be fitted and work correctly. Before beginning the installation of the seat, please check to make sure you have all of the seat components (1-5) shown below. 2 5 W.C bowl 4 3 2 1 ① ② ③ Nut PP Washer ④ ⑤ 2. Insert screws into WC pan. 3. Insert washer and bolt onto hinge screw but do not tighten. 4. Adjust seat to required position and then tighten the nuts to fix the seat in place. Hinge Toilet Seat Screw 1 Note: Please contact your branch of purchase if any parts are missing DO NOT use sharp or coarse materials or any corrosive products to clean the seat. 1. Insert square tabs of screws into slots in the back of the toilet seat. 1199