Download INSTALLATION MANUAL

Fig.11-5
On-site installation of cable diagram:
Power supply 1-Phase
220V～60Hz
2
(3-core cable 3X1.0mm )
Wrap magnetic ring 4 Rounds as shown
in the figure.
Remark: The Magnetic Rings are used to
solve the EMI problem. If there is no
need of EMI for the unit, the two Magnetic
Rings can be canceled.
Power supply 1-Phase
220V～60Hz
2
(3-core cable 3X3.3mm )
Wrap magnetic ring 1 Round as shown in the figure.
On-site installation of the line
(Please keep the power wiring and the communicational wring
of the indoor and outdoor unit away from the compressor,in
order to achieve the ideal EMC effect.)
For model 36(with 1-Phase outdoor unit)
Fig.11-6
INDOOR UNIT
X Y E
P Q E
L N
Y/G
3-core shielded cable to CCM
2
(3x0.5 mm )
Power Supply
1-Phase 220-240V ～ 50Hz
(3-core cable 3x1.0 mm 2 )
3-core shielded cable
(3x0.5 mm 2 )
Power Supply
3-Phase 380-415V ～ 50Hz
2
(5-core cable 5x2.5 mm )
For model 36-60 (with 3-Phase outdoor unit)
installation manual
PDF created with pdfFactory Pro trial version www.pdffactory.com