Download Deeter Wireless Sensor System User Manual

Deeter Wireless Sensor System – User Manual
1. Summary
The Deeter Wireless Sensor System consists of a remote sensor node that
transmits data over an RF network to a Base Station.
The sensor nodes enable remote wireless sensing of:
• Switch inputs
• Analogue resistive sensor inputs
• 4-to-20mA current loop circuits
The Base Station receives sensor signals and converts these to the following
outputs:
• Open-collector transistors for controlling a wide range of devices
• A 4-to-20mA current-loop driver
The system communicates using the IEEE 802.15.4™ wireless network protocol,
in the 2.4GHz ISM frequency band. This is an internationally approved, licence
free radio band, with no subscription or operating charges.
This User Manual introduces the system components, explains how to install and
setup a system, and includes specifications and product information.
© Deeter Electronics Ltd. Deeter Electronics Ltd., Deeter House, Valley Road, Hughenden Valley, High
Wycombe, Bucks. HP14 4LW.
Page 3 of 30