Download User Manual - EMS Physio Ltd

Transcript
Dose algorithm (460 only)
Press the Dose button to produce this screen:-
The various parameters can be changed using the Up/Down
buttons.
If an Ultrasound transducer is not connected this prompt
screen will appear:-
Plugging in an ultrasound transducer at this point and pressing
Next will cause a return to the Dose Algorithm display.
After adjusting the various parameters press the Select button
and the algorithm will calculate and display the treatment
settings for that particular set of input parameters. The
maximum available intensity will also be automatically set to
the value calculated by the dose algorithm.
Again, it is possible to edit and/or store these settings as
described above in the protocols section. Increment the output
intensity to begin treatment.
Primo Therasonic 360 & 460
23