Download User's Manual - Cole

Chapter 6:
Maintaining the Cabinet
The common service operations necessary to maintain the Evidence Drying
cabinet for peak performance are listed below.
Routine Maintenance Schedule
Weekly
• Using 70% ethanol, or a suitable disinfectant, surface disinfect the
inside of the cabinet.
•
Using an appropriate glass cleaner, or LabSolutions Glass & Surface
Wipes, Labconco part # 1570000; clean the door and the surface of
the UV lamp.
•
Operate the cabinet blower, noting if the Filter System Light turns on.
•
Ensure the cabinet water shut off valve is in the off position.
Monthly (or more often as required)
•
Using a damp cloth, or LabSolutions Glass & Surface Wipes,
Labconco part # 1570000; clean the exterior surfaces of the cabinet,
particularly the front and top of the cabinet, to remove any
accumulated dust.
•
All weekly activities.
•
Check the prefilters; replace both if needed.
Annually
•
All monthly activities.
•
Replace HEPA and granular activated carbon filters.
Product Service 1-800-522-7658
23