Download User Manual - ACP & D, Ltd.
Transcript
Parameter Name & Description See page 3-2 for symbol descriptions 342 [Analog Out1 Sel] 345 [Analog Out2 Sel] Vector 3-55 Related No. Group File Programming and Parameters Values Default: 0 “Output Freq” Options: See Table Analog Outputs INPUTS & OUTPUTS 001 002 003 Selects the source of the value that 004 drives the analog output. 005 007 [Analog Out1 Lo] Value 006 Options Param. 341 = Signed Param. 341 = Absolute [Analog Out1 Hi] Value 012 0 –[Maximum Speed] 0 Hz “Output Freq” +[Maximum Speed] 135 1 “Command Freq” –[Maximum Speed] 0 Hz +[Maximum Speed] 136 1* “Command Spd” –[Maximum Speed] 0 Hz/RPM +[Maximum Speed] 137 2 0 Amps 0 Amps “Output Amps” 200% Rated 138 3 –200% Rated 0 Amps “Torque Amps” 200% Rated 4 0 Amps 0 Amps “Flux Amps” 200% Rated 220 5 0 kW 0 kW “Output Power” 200% Rated 219 6 0 Volts 0 Volts “Output Volts” 7 0 Volts 0 Volts “DC Bus Volts” 8 0% “PI Reference” (1) –100% “PI Feedback” 9 –100% 0% 10 “PI Error” –100% 0% 11 “PI Output” –100% 0% 12 “%Motor OL” 0% 0% 13 “%Drive OL” 0% 0% 14* “CommandedTrq” –800% Rated 0% 15* “MtrTrqCurRef” (1) –200% Rated 0% 16* “Speed Ref” –[Maximum Speed] 0 Hz/RPM 17* “Speed Fdbk” –[Maximum Speed] 0 Hz/RPM 18* “Pulse In Ref” (1) –25200.0 RPM 0 Hz/RPM 19* “Torque Est” (1) –800% 0% 20-23** “Scale Block1-4” (1) 24** “Param Cntl” (1) * Vector Control Option Only **Vector firmware 3.001 & later (1) Refer to Option Definitions on page 3-56. 343 [Analog Out1 Hi] 346 [Analog Out2 Hi] Vector Sets the analog output value when the source value is at maximum. 344 [Analog Out1 Lo] 347 [Analog Out2 Lo] Vector Sets the analog output value when the source value is at minimum. Default: 120% Rated Input Volts 200% Rated Input Volts 100% 100% 100% 100% 100% 100% 800% Rated 200% Rated +[Maximum Speed] +[Maximum Speed] +[Maximum Speed] +800% 377 378 20.000 mA, 10.000 Volts Min/Max: 4.000/20.000mA 0.000/20.000mA v3 –/+10.000V Units: 0.001 mA 0.001 Volt Default: 0.000 mA, 0.000 Volts Min/Max: 4.000/20.000mA 0.000/20.000mA –/+10.000V Units: 0.001 mA 0.001 Volt v3 340 342 340 342