Download User Manual

In addition to the Basic Settings configuration page, end user also has access to the device Status page.
The following is a screen shot of the device Status page. Details are explained next.
Grandstream Device Configuration
STATUS
BASIC
SETTINGS
ADVANCED
SETTINGS
ACCOUNT ACCOUNT ACCOUNT ACCOUNT
1
2
3
4
00.0B.82.05.11.BC
10.10.1.3
GXP2000
Program-- 1.0.2.6 Bootloader-- 1.0.2.3
0 day(s) 5 hour(s) 56 minute(s)
Account 1: Yes
Account 2: No
Account 3: No
Account 4: Yes
PPPoE Link Up: disabled
detected NAT type is full cone
MAC Address:
IP Address:
Product Model:
Software Version:
System Up Time:
Registered:
All Rights Reserved Grandstream Networks, Inc. 2004, 2005
MAC Address
The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.
IP Address
This field shows LAN IP address of GXP-2000
Product Model
This field contains the product model info.
Software Version
•
•
Program: This is the main software release, its number is always used for
firmware upgrade.
Bootloader: This is normally not changed.
System Up Time
This field shows system up time since the last reboot.
Registered
This field indicates whether the device is registered to the SIP server(s).
PPPoE Link Up
This field shows whether the PPPoE connection is up if connected to DSL
modem.
34