Download 1 Control Type S1Ca Operating instructions

Installation
External control
Wiring diagram
View of the cable plug from the front
Level switch cable
3
2
Universal control wire (5-core)
for
2
1
for
3
5
1
blue + black: open
-> Alarm message
brown + black: open
-> Alarm message + Pump stopped
2
4
for
External/Contact:
white + black: close
-> Start contact for pump
(Pause function inactive?:
brown + black: closed)
3
4 black / GND
3 blue
2 white / Cod.
Analog:
1 brown / 5 V
brown + black: closed
-> Pump dosing
brown + black: open
-> Pump stopped
Dosing monitor cable
1
5 grey /Auxiliary
3 blue / Analog +
Pause function:
4 black / GND
2 white / Contact
1 brown / Stop
3 brown / Stop
2 blue / Alarm
1 black / GND
4
blue, black
-> Analog input 0/4-20 mA
(Pause function inactive?:
brown + black: closed)
Auxiliary rate:
grey + black: closed
-> Pump dosing with preset
stroke rate
Wiring example - see next page
Diaphragm rupture sensor cable
for
External/contact cable (2-core)
for
2
1
Contact open -> Alarm message +
For control type 0: Pump stopped
4 white
2 brown
4
1 black / GND
2 blue / Alarm
2
Close contact -> Metering stroke
P_SI_0090_SW
31