Download Nucleic Acid Isolation System QuickGene
Transcript
1 Installation ■ Internal view 1 Carrier 2 Wash Buffer Pump Sensor 3 Pressure Head Wash Buffer Nozzle Elution Buffer Pump Elution Buffer Nozzle 4 Holder Stand Buffer stand 5 Name 6 7 6 Function Buffer Stand Set the conical tubes to contain elution buffer and wash buffer, and the Discharge Tray. Holder Stand Set the Tube Holder and Cartridge Holder. Set collection tubes and waste tubes in the Tube Holder. Set cartridges in the Cartridge Holder. Wash Buffer Pump Sends the wash buffer in the conical tube to the Carrier. Elution Buffer Pump Sends the elution buffer in the conical tube to the Carrier. Carrier Moves automatically during extraction operation. Pressure Head Presses out the air and uses the pressure to flush out solutions. Wash Buffer Nozzle Provides the wash buffer into Cartridges. Elution Buffer Nozzle Provides the elution buffer into Cartridges. Sensor Checks that the carrier is placed in the correct position. Do not touch the sensors. QuickGene-810 User's Guide Rev. 1.3