Download Nucleic Acid Isolation System QuickGene

Transcript
1 Installation
■ Internal view
1
Carrier
2
Wash Buffer
Pump
Sensor
3
Pressure Head
Wash Buffer
Nozzle
Elution Buffer
Pump
Elution Buffer
Nozzle
4
Holder Stand
Buffer stand
5
Name
6
7
6
Function
Buffer Stand
Set the conical tubes to contain elution buffer and wash buffer, and the
Discharge Tray.
Holder Stand
Set the Tube Holder and Cartridge Holder.
Set collection tubes and waste tubes in the Tube Holder.
Set cartridges in the Cartridge Holder.
Wash Buffer Pump
Sends the wash buffer in the conical tube to the Carrier.
Elution Buffer Pump
Sends the elution buffer in the conical tube to the Carrier.
Carrier
Moves automatically during extraction operation.
Pressure Head
Presses out the air and uses the pressure to flush out solutions.
Wash Buffer Nozzle
Provides the wash buffer into Cartridges.
Elution Buffer Nozzle
Provides the elution buffer into Cartridges.
Sensor
Checks that the carrier is placed in the correct position.
Do not touch the sensors.
QuickGene-810 User's Guide Rev. 1.3