Download Troubleshooting Async Multilink PPP Operations

Transcript
Chapter 2
Diagnosing and Troubleshooting Async Multilink PPP
Async MPPP Troubleshooting Tables
Table 2-3
Poor performance
Problem
NAS: Processor overhead
Suggested Diagnostic Steps
1.
Use the show processes cpu Cisco IOS
command at the NAS to determine CPU
utilization.
See the output provided in “Cisco IOS show
processes cpu Command Output” for
additional information.
2.
If top line utilization number is approaching
100 percent, investigate CPU load issue.
Refer to the following URL:
http://www.cisco.com/warp/public/63/hig
hcpu.html
PC: Dialup Networking (DUN) 1.3 or higher
needed
PC DUN 1.3 was issued by Microsoft as a
performance improvement over PC DUN 1.2.
Refer to Microsoft technical support for
additional information.
Refer to this Microsoft document for details:
•
http://microsoft.com/ntserver/nts/downloa
ds/recommended/dun13win95/ReleaseNotes.
asp
Troubleshooting Async Multilink PPP Operations
2-7