Download VES-1124: User's Guide (Oct 2004)

VES-1124 User’s Guide
Table 23-2 Command Summary: sys sw
COMMAND
set
mac
<threshold: 1(5%) 2(10%) 3(15%)
4(20%) 5(25%)>
display [<mac> <vid>]
Displays current run-time static
MAC addresses on the ports.
set <port> <MAC> <vid>
Configures a static MAC address
on the specified port.
del <port> <MAC> <vid>
Deletes a static MAC address on
the specified port.
<timeout>
Sets aging timeout.
Displays the aging timeout
period.
ageView
list
<all | port_no>
Displays the forwarding table
entries.
flush
[port]
Flushes learned MAC addresses
in the forwarding table.
count
[port]
Displays the number of MAC
addresses in the forwarding
table.
search
<MAC> <VID>
Searches the MAC/VID learned
on which port.
The following commands relate
to port mirrors. Port mirroring is
copying traffic from one or all
ports to another or all ports for
external analysis.
mirror
23-10
Specifies the threshold
percentage of broadcast frames
that triggers broadcast storm
control.
Displays static MAC addresses.
static
ageSet
DESCRIPTION
enable
Turns on port mirroring.
disable
Turns off port mirroring.
display
Displays current run-time port
mirror settings.
set
<none | port_no...>
Sets the mirrored port (s) (the
ports from which traffic is copied
to another port for analysis).
direction
<ingress | egress | both>
Sets the direction of mirrored
traffic.
port
<monitor port_no>
Sets the monitor port (the port to
which traffic is copied for
analysis).
Introduction to CLI