1
Download ZyWALL USG User's Guide
Transcript
Chapter 35 User/Group The following table describes the labels in this screen. Table 174 Configuration > User/Group > User > Add LABEL DESCRIPTION User Name Type the user name for this user account. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. User names have to be different than user group names, and some words are reserved. See Section 35.2.1.1 on page 594. User Type Select what type of user this is. Choices are: • • • • • • Password admin - this user can look at and change the configuration of the ZyWALL limited-admin - this user can look at the configuration of the ZyWALL but not to change it user - this user has access to the ZyWALL’s services but cannot look at the configuration guest - this user has access to the ZyWALL’s services but cannot look at the configuration ext-user - this user account is maintained in a remote server, such as RADIUS or LDAP. See Ext-User Accounts on page 592 for more information about this type. ext-group-user - this user account is maintained in a remote server, such as RADIUS or LDAP. See Ext-Group-User Accounts on page 593 for more information about this type. This field is not available if you select the ext-user or ext-groupuser type. Enter the password of this user account. It can consist of 4 - 31 alphanumeric characters. Retype This field is not available if you select the ext-user or ext-groupuser type. Group Identifier This field is available for a ext-group-user type user account. Specify the value of the AD or LDAP server’s Group Membership Attribute that identifies the group to which this user belongs. Associated AAA Server Object This field is available for a ext-group-user type user account. Select the AAA server to use to authenticate this account’s users. Description Enter the description of each user, if any. You can use up to 60 printable ASCII characters. Default descriptions are provided. Authentication Timeout Settings This field is not available if you select the ext-group-user type. Lease Time This field is not available if you select the ext-group-user type. If you want to set authentication timeout to a value other than the default settings, select Use Manual Settings then fill your preferred values in the fields that follow. Enter the number of minutes this user has to renew the current session before the user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. Admin users renew the session every time the main screen refreshes in the Web Configurator. Access users can renew the session by clicking the Renew button on their screen. If you allow access users to renew time automatically (see Section 35.4 on page 599), the users can select this check box on their screen as well. In this case, the session is automatically renewed before the lease time expires. 596 ZyWALL USG 50 User’s Guide
