Download Operating Instructions Type 8835 Matrix

Type 8835
System description
5
SYSTEM DESCRIPTION
6
TECHNICAL DATA
5.1 Intended application area
6.1 Conformity
The device has been designed to regulate the flow control of heating
and cooling water in commercial vehicles.
Type 8835 conforms with the EC Directives according to the EC
Declaration of Conformity (if applicable).
5.2 General description
6.2 Standards
The device is a process valve system based on Type 2000 and
Type 0300 according to the requirement profile of the latest heating
and cooling systems.
The applied standards, which verify conformity with the EC Directives, can be found on the EC-Type Examination Certificate and / or
the EC Declaration of Conformity (if applicable).
The device consists of standard valves. It uses the advantages of control
technology, such as ramp drive during opening and closing, as well as
the speed of the open / closed process technology.
6.3 Identification
Therefore, simple pulse control of common controllers can be used to
optimize the heating and cooling water flow.
The device is fitted with a rating plate which uniquely identifies the
device and indicates the most important technical data.
Do not remove the rating plate from the device.
The device operates at opening and closing times of approx. 1 second
almost without water hammers.
It is essential for identification when installing and servicing
the device.
The device is available as a single, double or triple version with different
control functions.
The double and triple versions can also be fitted with a bypass valve.
Made in Germany
5.3 Functions
8835 3-fach Matrix
P Medium 0-3 bar
Pilot 4,5 - 10 bar
24V DC 4W
S/N 1001
00210422
Type, device designation
Medium pressure
Control pressure
Voltage, type of current,
output
W52MM
Serial number Ident number Manufacturer code
english
7