Download User manual

Caution
If the stop time is earlier in the day than the start time it means that the
period extends past midnight.
Scheduling always starts on the date that the start time is set for.
Menu
2.9
advanced
DGYDQFHG Menu advanced is intended for the
advanced user. This menu has several
sub-menus.
SHULRGLF LQFUHDVHV
Menu
2.9.1
periodic increases
period
SHULRGLF LQFUHDVHV Setting range: 1 - 90 days
Default value: 14 days
DFWLYDWHG
start time
SHULRG
Setting range: 00:00 - 23:00
VWDUW WLPH
Default value: 00:00
GD\V
1H[W SHULRGLF LQFUHDVH
To prevent bacterial growth in the water heater, the heat pump and any
additional heat can increase the hot water temperature for a short time
at regular intervals.
The length of time between increases can be selected here. The time can
be set between 1 and 90 days. Factory setting is 14 days. Untick "activated"
to switch off the function.
34
Chapter 3 | SMO 20 – at your service
NIBE™ SMO 20