1
Download bdiGDB User Manual
Transcript
bdiGDB for BDI3000 (PowerPC MPC85xx/P10xx/P2020) User Manual 21 3.2 Configuration File The configuration file is automatically read by the BDI after every power on. The syntax of this file is as follows: ; comment [part name] identifier parameter1 identifier parameter1 ..... [part name] identifier parameter1 identifier parameter1 ..... etc. parameter2 ..... parameterN parameter2 ..... parameterN ; comment parameter2 ..... parameterN parameter2 ..... parameterN Numeric parameters can be entered as decimal (e.g. 700) or as hexadecimal (0x80000). Note about how to enter 64bit values: The syntax for 64 bit parameters is : Hex values may also be entered as: [<high word>_]<low word> 0xnnnnnnnnnnnnnnnn The "high word" (optional) and "low word" can be entered as decimal or hexadecimal. They are handled as two separate values concatenated with an underscore. Examples: 0x0123456789abcdef 0x01234567_0x89abcdef 1_0 256 3_0x1234 0x80000000_0 =>> =>> =>> =>> =>> =>> 0x0123456789abcdef 0x0123456789abcdef 0x0000000100000000 0x0000000000000100 0x0000000300001234 0x8000000000000000 © Copyright 1997-2014 by ABATRON AG Switzerland V 1.08
