Download WP10 -D10.7 User Guide

Transcript
OCERA User's Guide
171/235
February 2005
10.2) Cross Compilation for
ARM/iPAQ
10.2.1) ARM Processor
Because the hardware on ARM/iPAQ is different from most desktops, a cross-compiler
capable of producing code for different platform is usually needed. Toolchains contain
the neccessary tools to cross-compile code for that target machine. The easiest solution is
to use GCC, which is open-source and can be obtained for free.
a) Cross-Compiling for the iPAQ
You can compile applications for the iPAQ by using an x86 Linux machine and crosscompiling.
The cross toolchain works just like the standard native compiler, except that
each of the tools is prefixed with "arm-linux-". For many programs, the crosscompiler can be invoked by running make as follows:
make CC=arm-linux-gcc all
If the make process calls other target-specific tools, then these also need to be specified:
arm-linux-ld
arm-linux-ar
arm-linux-ranlib
arm-linux-strip
arm-linux-g++
arm-linux-as
10.2.2) Where to find a pre-built toolchain
You can download the toolchain from handhelds site:
Ocera User's Guide
171/235
Cross compilation