Download SequeLink Troubleshooting Guide and Reference

171
7369
7370
7391
7392
7393
7394
7395
An internal error occurred.
Cause
An unexpected error occurred.
Action
Contact DataDirect Technologies technical support.
An internal error occurred.
Cause
An unexpected error occurred.
Action
Contact DataDirect Technologies technical support.
Driver cannot perform requested operation: {0}.
Cause
The method {0} is not supported by this version of the JDBC driver.
Action
Verify the method {0} in your JDBC application.
Object is closed. The JDBC application used an illegal method on a closed object.
Cause
Object is closed. The JDBC application used an illegal method on a
closed object.
Action
Correct your JDBC application.
The value specified for parameter ‘{0}‘ is invalid.
Cause
The value specified for parameter ‘{0}‘ is invalid.
Action
Verify the value of the parameter {0} in your JDBC application.
The method call ‘{0}’ is not supported on a forward-only result set. The JDBC
application used an illegal method on a forward-only result set.
Cause
The method ‘{0}’ is not supported on a forward-only result set. The JDBC
application used an illegal method on a forward-only result set.
Action
Correct your JDBC application.
Timeout expired.
Cause
A timeout expired.
Action
Verify that the SequeLink Server is running and that you have specified
the correct network address of the host. If your configuration is correct,
increase the connection timeout value.
SequeLink Troubleshooting Guide and Reference