Download INSTALLATION MANUAL
Transcript
2. 2.1 INSTALLATION PROCEDURE Installation Location and Instrument Main Body Movement zConditions of installation location CAUTION • Leave a space of 10 cm or more behind the instrument. If the cooling fan is blocked, the temperature inside the instrument will rise and it may cause malfunction. • Install the instrument on the specified table (optional) or a support which is strong enough for the weight of the instrument (52 kg). Vibrations and noises may be produced, and normal processing may not be performed. zInstrument main body movement WARNING • Use a hand cart to move the instrument to a different location. At least two persons are necessary to lift the instrument. Back injury or stumbling may occur when a single person attempts to move the instrument. • When lifting the instrument, do not lift it by its cover. Lift it by placing hands at front lower parts (A) and (B), rear lower parts (C) and (D), and right and left side lower parts (E) and (F). Lifting by the cover may cause the instrument to drop resulting in injury or malfunction. • Be careful not to get fingers caught when setting the lifted instrument down. Fingers may get caught between the table and instrument resulting in injury. 3 2