Download User Manual Addendum
Transcript
Operation SAVING AND COMPARING SOUNDS Once a sound has been edited (any control moved or function changed) the [EDIT] and [SAVE] indicators will start to flash, warning that the program memory setup has been changed, as shown below: Menus save EDIT comp LAST Both flash when program setup has been edited NEXT MENU VALUE / program ( push) Midi utility www.redsound.com NOTE: The [SAVE] and [COMPARE] buttons are dual function (also control MENU selections) so, if any of the [MENU] functions are ON, the [SAVE] indicator will not flash and the [SAVE]/[COMPARE] functions will be inactive. SAVE: To save the edited sound in the same memory location simply press the [SAVE] button once, the display confirming the save as shown below: Display shows... Menus Parameter Value Parameter Value save Press this button once to store new sound comp LAST NEXT MENU Midi then... utility www.redsound.com The [EDIT] and [SAVE] indicators will now switch off and the new setup will be stored in memory. COMPARE: To hear the original sound before overwriting it, press the [COMPARE] button: - once to hear the original sound, then again to hear the edited version (this operation can be done as many times as necessary, toggling between the two sounds). When the [COMPARE] function is selected the indicator in the [COMPARE] button will flash along with the [EDIT] and [SAVE] indicators, as shown below: Menus Menus save SAVE indicator flashing alone = EDITED sound save comp LAST NEXT SAVE and COMPARE indicators flashing together = ORIGINAL sound MENU Midi NEXT MENU Midi utility utility www.redsound.com PAGE www.redsound.com eleVAta - Polyphonic Synthesizer comp LAST 10 Press COMPARE button once to hear ORIGINAL sound