Download User Manual Addendum

6
MADE IN ENGLAND
ON/OFF
+
9 V DC
LEFT [1]
MAIN
3
5
SUB 1
4
4. EXTERNAL INPUTS 1&2 - Jack Connectors
Use these sockets to connect any external line level sound sources to
eleVAta for filter/envelope processing whilst using MIDI control.
5. OUTPUT SECTION - Jack Connectors
Use the [MAIN] sockets to connect the master stereo output of eleVAta to
your mixing desk or amplification system. The [SUB 1] and [SUB 2]
sockets can be used when further individual outputs are required.
SUB 2
6
TWO
4
ONE
EXTERNAL I/P
6. POWER SECTION - Switch/Connector
Use the switch to turn the power on and off. Only use the 9vDC 1.33 mA
PSU supplied with eleVAta to power the unit.
1
Red Sound
eleVAta - Polyphonic Synthesizer
PAGE
CAUTION:
DO NOT OPEN CASE OTHER THAN TO FIT/REMOVE MODULES. REFER TO
QUALIFIED SERVICE PERSONNEL. NO USER SERVICEABLE PARTS INSIDE.
ANALOG
16 VOICE POLYPHONIC SYNTHESIZER
VIRTUAL
the colour of music
EXTERNAL
JOYSTICK
THRU
2
OUT
MIDI
IN
3
MIC/LINE
[OPTIONAL]
VOC I/P
2. MIDI IN/OUT/THRU - DIN Connectors
MIDI data will be transmitted and received by these connectors.
3. VOCODER INPUT - Jack Connector
Use this socket to connect the microphone input/control signal to eleVAta
ONLY when the optional VOCODA conversion is installed.
5
OUTPUTS
1. EXTERNAL JOYSTICK - DIN Connector
Use this socket to connect the optional remote joystick to eleVAta.
RIGHT [2]
POWER
Rear Panel
4