Download User Manual - Polytech Instrumentation

Step 20
Applying the "H2 " sticker on the front hood of the car body
20A
20B
Position the car on a flat surface, with the
front of the car facing you. Remove the
sticker from its backing and position it
according to the picture (see 20A).
There should be about 1 mm between each side of
the sticker and the green stripes on the car body,
and the sticker should be placed in the center of
the front hood (see 20B).
Congratulations!
The assembly of your H-racer 2.0 is now completed.
The car is now ready to be fueled with hydrogen!
25
26