Download User manual

3 Technical Data IS1BP360-O-CL + IS2BP090-O-CL
3 Technical Data IS1BP360-O-CL + IS2BP090-O-CL
General Parameters2
IS1BP360-O-CL
IS2BP090-O-CL
Measurement range
360°
±90°
Resolution
0.01°
0.01°
Accuracy
Range
0...360°
typical
±0.04°
Cross Sensitivity (compensated)
maximum
±0.10°
Range
up to ±60°
up to ±70°
up to ±80°
up to ±85°
-
Temperature coefficient (zero point)
typical
±0.02°
±0.04°
±0.08°
±0.16°
maximum
±0.05°
±0.10°
±0.20°
±0.40°
typ. ±0.10 %, max. ±0.50 %
typ. ±0.0080 °/K
Sampling rate
80 Hz
Cut-off frequency
typ. 20 Hz, 2nd order (without digital filter) / 0.1 ... 25 Hz, 8th order (with digital filter)
Operating temperature
-40 °C to +80 °C
Characteristics
Data rates
10 k, 20 k, 50 k, 62.5 k, 100 k, 125 k, 250 k, 500 k, 800 k Bit/s, 1 MBit/,s autom detection
Functions
Angle request, cyclical and synchronized outputs, two programmable digital filter (lowpass, 8th order), configuration via object dictionary
Electrical Parameters
Supply voltage
8 to 48 VDC
Current consumption
<33 mA @ 24 V
Mechanical Parameters
Connector CAN
2x sensor connector 5-pole M12 (loop through connector)
Degree of protection
IP65/67
Dimensions / Weight
Plastic housing: 66 mm x 90 mm x 36 mm / ca. 215 g
CANopen conformity, Certificate# CiA201108-301V402/20-0143
CiA DS-301, v4.2.0
Application layer and communication profile
CiA DS-410
Device profile for inclinometer
CiA DSP-305
Layer setting service (LSS) and protocols
CiA DR-303-3
Indicator specification (Status-LED)
CiA AN-801
Automatic bit-rate detection
CE conformity to EC Directive 2006/42/EC
EC Directives
RL 2004/108/EC
EMC Directive
RL 2006/95/EC
Low Voltage Directive (LVD)
Harmonized standards
DIN EN 50498:2010
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic
equipment in vehicles
EN 60950-1:2006/A1:2010
Information technology equipment. Safety. General requirements
EN ISO 14982:2009
Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
DIN EN 13309:2010
Construction machinery - Electromagnetic compatibility of machines with internal
power supply
Table 3: Technical Data
2
All indicated angle accuracies are valid after a running time of 10 minutes at 25 °C, Cut-off frequency 0.3 Hz
Absolute calibration accuracy (at 25 °C): ±0.05°
Document: 231xx-HB-1-0-E-ISxxxxxx-O-xL
4