Download USER MANUAL - CAMBOARD Electronics

im Vertrieb von
4.2
CAMBOARD Electronics
Your KDS-EN2R
Figure 2 defines the KDS-EN2R:
Figure 2: KDS-EN2R
#
Feature
Function
1
ON LED
Lights green when the power is ON and the system is
active
Blinks when the power is ON and the system is booting
2
LINK LED
Lights green when LAN is connected
3
DATA LED
Lights green when system is active
Blinks when connecting to the transmitter or if the HDMI
source is disconnected
4
MODE Button
Press the MODE button using a small screwdriver (see
Section 4.3)
5
EDID Button
Press the EDID button using a small screwdriver (see
Section 4.3)
6
GROUP ID DIP-switches
Set the group ID (see Section 4.4)
7
5V DC
+5V DC connector for powering the unit
8
LAN RJ-45 Connector
Connects to the LAN RJ-45 connector on the
KDS-EN2T directly or via an Ethernet switch
9
HDMI OUT Connector
Connects to the HDMI acceptor
10
RS-232 9-pin D-sub Connector
Connects to an RS-232 port
KDS-EN2T, KDS-EN2R - Defining the KDS-EN2T and KDS-EN2R
www.camboard.de
7
Tel. 07131 [email protected]
Fax 07131 911203