Download USER MANUAL - CAMBOARD Electronics

im Vertrieb von
CAMBOARD Electronics
Using Your FC-7402 SDI to Analog Converter
Table 1: Front Panel FC-7402 SDI to Analog Converter
#
Feature
Function
1
2
3
4
5
6
POWER Switch
HUE Button
CONT (CONTRAST) Button
BRIGHT (BRIGHTNESS) Button
SHARP Button
COLOR Button
7
8
9
10
11
12
13
14
SATURATION LED
R-Y LED
B-Y LED
STO Button
RCL Button
- Button
+ Button
7-segment Display
Illuminated switch supplying power to the unit
Press the HUE button and adjust using the + and – buttons
Press the CONT button and adjust using the + and – buttons
Press the BRIGHT button and adjust using the + and – buttons
Press the SHARP button and adjust using the + and – buttons
Cycles between SATURATION, R-Y, and B-Y. The corresponding
LED lights
Lights after selecting SATURATION via the COLOR button
Lights after selecting R-Y via the COLOR button
Lights after selecting B-Y via the COLOR button
Stores the current setup in the non-volatile memory
Recalls a setup from the non-volatile memory
Press to decrease
Press to increase
Displays data when using a front panel button; briefly displays
firmware version when machine is turned on
Illuminates when the panel is locked (blinks after pressing a button
when the panel is locked)
Engages/disengages the front panel buttons
15 PANEL LOCK LED
16 PANEL LOCK Button
Table 2: Rear Panel FC-7402 SDI to Analog Converter
#
1
2
3
4
5
6
7
8
9
10
5
Feature
SDI IN BNC Connector
SDI OUT BNC Connector
Y / G OUTPUTS BNC Connector
B-Y / B OUTPUTS BNC Connector
R-Y / R OUTPUTS BNC Connector
YC OUTPUT 4p Connector
CV OUTPUTS BNC Connector
Dipswitches
RS-232 Port
Power Connector with Fuse
Function
Connects to the SDI source
Connects to the reclocked and equalized SDI acceptor
1
2
Connects to the RGB or component video acceptor
Connects to the s-Video (Y/C) output
Connects to the composite video output
Dipswitches setup (see section 5.1.2)
Connects to the PC or the Remote Controller
AC connector enabling power supply to the unit
Using Your FC-7402 SDI to Analog Converter
You can use your FC-7402, to convert SDI video to professional quality
analog video—composite video, s-Video and component3 (YUV or RGB)
video—as the example in Figure 2 illustrates.
1 For RGB video, connect all 3 connectors: G, B, and R
2 For component video, connect all 3 connectors: Y, B-Y, and R-Y
3 Y, B-Y, R-Y is also known as Y, Pb/Cb, Pr/Cr, or YUV or Y, Pb, Pr
www.camboard.de
3
Tel. 07131 [email protected]
Fax 07131 911203