Download User's manual
Transcript
PICO831 Intel® AtomTM N2800/N2600 Processor Pico-ITX Board 4.4 AX93267 Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table which shows all connectors on the hardware. Connector Description CN1 DC Power Jack CN2 DC Power In Connector CN3 VGA Connector CN4 D-Sub VGA Connector CN5 Ethernet Connector CN6 RJ-45 Ethernet Port 4.4.1 DC Power Jack (CN1) The CN1 is a DC power jack for DC +5V input. Pin Signal 1 2 3 4 GND GND +5V +5V 4.4.2 DC Power In Connector (CN2) This is a 1x4-pin wafer connector for DC +5V input. It is suggested to connect this CN2 to PICO831’s CN7. 34 Pin Signal 1 2 3 4 +5V +5V GND GND AX93267 I/O Board