Download USER'S MANUAL FOR CORHYD: AN INTERNAL DIFFUSER

Transcript
1 Introduction
CorHyd is a computer code for the calculation of flow characteristics in multiport diffuser
constructions. It includes loss calculations for complex geometries, as well as additional flow
forcing due to density differences.
CorHyd is a code written within the commercial software MatLab Release 14 from the
company Mathworks. The code includes a graphical user interface and allows to use all
MatLab functions for graphics, analysis and also further modifications. CorHyd is no selfexecutable and needs MatLab to be installed. But also open source softwares like Scilab
(http://scilabsoft.inria.fr/) or Octave (http://www.octave.org) allow to import and execute the
MatLab based CorHyd files. CorHyd is an open source code and allows for easy
modifications. Downloads of the code and this manual, as well as further information are
available under: http://www.cormix.de/corhyd.htm.
An additional version is foreseen to be included into CORMIX (Cornell Mixing Zone Expert
System from MixZon, www.cormix.info). It is based on the same algorithm and includes the
same loss formulations, but uses the CORMIX interface and allows for easy data transfer
between an external hydraulics calculation with CORMIX and the internal hydraulics
calculation with CorHyd.
Publications from Bleninger et.al, 2002 and Bleninger et.al, 2005 describe scientific basis and
demonstrate comparisons and validation.
The objectives of this manual are: a) to provide comprehensive description of CorHyd, b)
give guidance for assembly and preparation of required input data, c) delineate ranges of
applicability, d) guidance for interpretation of results, and e) to illustrate practical application.
1.1 Installation and start
Unzip the matlab files into one folder on your computer. Run Matlab and change to the folder,
where the files have been saved as your working directory. Type IDH and the graphical user
interface opens up. Open an existing test file and press run to do the first calculation.
Institut für Hydromechanik, Universität Karlsruhe
4