Download USER MANUAL - CAMBOARD Electronics
Transcript
im Vertrieb von CAMBOARD Electronics To operate the combined 14 x 1 Master audio switching group: 1. Press the Master Audio Sel button. The button lights red. 2. Press one of the 14 input select buttons (three DVI, three PC, three HDMI, three CV and two DP) to switch the audio to the Master Out connector. The selected button lights green and the input is switched to the Master Audio output. Note: If this is the same input as is selected for the audio group selection, the button lights purple. 3. Press the Master Audio Sel button to exit the Master audio selection and return to the group selection. The button no longer lights but the last Master audio selection remains active. 6.3 Locking the Front Panel Lock your VP-28 to prevent changing the settings accidentally or the front panel buttons being tampered with. To lock the front panel of the VP-28: • Press and hold the LOCK button. The LOCK button lights and the front panel buttons are locked. Pressing any button has no effect but the LOCK button flashes briefly. The VP-28 can be operated via the remote IR controller, RS-232 or Ethernet To unlock the front panel of the VP-28: • Press and hold the LOCK button. The front panel buttons are unlocked and the LOCK button no longer lights VP-28 - Operating the VP-28 www.camboard.de 15 Tel. 07131 [email protected] Fax 07131 911203