Download USER MANUAL

1．Product Details
A certain color can be set without a controller, and strobe on that color
1．1．Specifications
is available.
Input Voltage: AC90-240V 50/60Hz
■
“Light Cut Software”
Power: 144W
At “STAG” Mode, if the main dimmer is at value “0” when onboard
LED: 18 pcs 8W quad color LED
program or edited program is working, the light will be off, while
Beam Angle: 25, 40
program is still working.
Life: 50,000 hours
Difference to “BLACKOUT”: it is just for the lights, no effect to the
Control Mode: DMX , Master/slave, Auto-run, Sound control
controller.
DMX Modes: 7 DMX working modes
■ ID Setting
DMX channel: 11CH/3CH/4CH/4CH/5CH/6CH/3CH
At “STAG” mode，Lights with the same ID(Max 66 ) can be controlled
IP Rating: IP20
separately. Effects includes: light up one by one, color change, strobe,
Product Size: 280*220*320mm
fading change, etc.
■ Non-linear and linear dimming
N.W.: 3.5KG
1．2．Features
16 bit（60000 steps）
■ 4 Control Modes
■ White Balance
◆ External Control
white color at different color temperature
DMX512 control (7 DMX working modes)
Master/slave control
■ Color Reset
Software for adjusting the current.
◆ Auto-run
■ Display Protection
Onboard Program
Display will turn off if no work for 30 seconds, press any keep to exit
Various fading， micro color change
the protection mode.
Various strobe effects: speed change (slow to fast), mix(strobe+colors、
strobe+color change)……
■ Over-temperature Protection
A certain value of temperature can be set to protect the lights
■ Pass word for button operation
Editable Programs
Functional, useful editable programs. Programs can be edited without
external controller. Programs like color change, step change, strobes,
1．3．Fast Instructions
■ Mode change and setting
◆At main menu, all functions showing on display are under external
can be combined randomly.
Programs can be downloaded from master light
◆ Static Color Mode
DMX control.
◆DMX512 is the default mode, the lights can only be controlled by DMX,
1
2