Download USER MANUAL

iPod Dock
Using an iPod adapter
The iPod Dock is located in the top cover of the , and is sealed by a
cover plate in its default state. If you wish to connect an iPod, please remove
the cover plate by gently levering it up using a small pointed instrument such as
a screwdriver; you will find a small recess in the plate where the screwdriver
blade can be inserted.
Locate the adapter which matches your iPod, and carefully place it in the well,
front edge first. Engage the rear edge by gently pressing it down.
If you do not own a suitable adapter for your iPod, you can order the item from
your local iPod Store or Apple dealer.
Please do not use an adapter unless it is an exact match to your
model of iPod.
If the adapter does not fit properly (e.g. too large), the iPod will not
be held securely in the mount, and there is a danger of bending or
otherwise damaging the plinth.
Changing the adapter
32
If you wish to replace an adapter which you have already fitted, you can lever
the installed adapter out of the well in the Dock as shown in the drawing, and
install a new one.