Download User Manual - Terminal Systems

Menu Items - Network
2.3.1.3. DNS configuration
In this section you can configure the DNS server settings. These settings are only necessary,
if the system is configured as a router on LAN1.
Figure 16: DNS configuration
•
Use a DNS server address: Enable the DNS server.
•
Primary DNS server: Enter the first DNS server IP address.
•
Secondary DNS server: Enter the second DNS server IP address.
•
Tertiary DNS server: Enter the third DNS server IP address.
2.3.1.4.
Default gateway configuration
Figure 17: Default gateway configuration
•
Use a gateway address: Enable the default gateway.
•
Default gateway: Enter the default gateway IP address.
S S V R e m o t e A c c e s s G a t e wa y - U s e r M a n u a l - R e v i s i o n 1 . 2
15