Download About these Operating Instructions

Basic control principles
Switching between joystick and on-board computer
Display
5
Section state
Section is switched off.
Section is preselected.
Section is ready for spreading.
Section is preselected and the main section switch is switched on.
Section is applying.
Illustration
The following diagrams show how the sections in the boom display area may look:
Boom display area – example 1
Section 1
is switched off.
Sections 2 to 7
are preselected and applying.
Boom display area – example 2
Section 1
is switched off.
5.8
Sections 2 to 7
are preselected but are not applying.
Switching between joystick and on-board computer
As you use the SC-Box, you can control the sections and main switch with these units:
▪ With on-board computer switches
▪ With the joystick or display keys
Procedure
This is how you change the unit used for section control:
1. Call the start screen on the display.
2.
- press.
⇨
Mueller Electronics, Inc.
- appears in the work screen. You can control the sections with the on-board
computer switches.
21