Download User Guide Version 6.1 - RWTH Aachen University

User Guide Version 6.1
Volume III: POST-PROCESSING
'Resolution of partial differential equations is more about art than science'.
“2+2=4 except for large values of 2”
“42”
Chapter 1 How to use this manual
“
“
MICRESS® User Guide Volume III: Post-Processing
1/70
Chapter 2 Introduction
MICRESS® User Guide Volume III: Post-Processing
2/70
Chapter 2 Introduction
MICRESS® User Guide Volume III: Post-Processing
3/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
4/70
Chapter 4 DP_MICRESS
*geoF.mcr
*rest.mcr
MICRESS® User Guide Volume III: Post-Processing
5/70
Chapter 4 DP_MICRESS
output
*.concN.mcr
*.cPhaN.mcr
*.dGsp.mcr
*.diff.mcr
*.driv.mcr
*.frac.mcr
*.fracN.mcr
*.geoF.mcr
*.hStr .mcr
*.intf .mcr
*.korn.mcr
*.krum.mcr
*.millx.mcr
*.mueS.mcr
*.orie.mcr
*.phas.mcr
*.rest.mcr
*.rex .mcr
*.sxxCV.mcr
MICRESS® User Guide Volume III: Post-Processing
6/70
Chapter 4 DP_MICRESS
*.temp.mcr
*.uxCV.mcr
*.vel.mcr
*.vxCV.mcr
*.vM.mcr
*1DExt_conc1.mcr
*1DExt_conc2.mcr
*1DTemp_Temp.mcr
*1DTemp_enth.mcr
MICRESS® User Guide Volume III: Post-Processing
7/70
Chapter 4 DP_MICRESS
*in. txt
*log.txt
*.TabC.txt
*.TabD.txt
*.dTLat.txt
*.TabF.txt
*.TabGD.txt
*.TabK.txt
*.TabL.txt
MICRESS® User Guide Volume III: Post-Processing
8/70
Chapter 4 DP_MICRESS
*.TabLin.txt
*.TabN.txt
*.TabP.txt
*.TabR.txt
*.TabO.txt
*.TabT.txt
*TabTQ.txt
*TQ.txt
MICRESS® User Guide Volume III: Post-Processing
9/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
10/70
Chapter 4 DP_MICRESS
.








MICRESS® User Guide Volume III: Post-Processing


11/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
12/70
Chapter 4 DP_MICRESS
→
MICRESS® User Guide Volume III: Post-Processing
13/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
14/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
15/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
16/70
Chapter 4 DP_MICRESS
◦
:
◦
◦
MICRESS® User Guide Volume III: Post-Processing
:
17/70
Chapter 4 DP_MICRESS
:
MICRESS® User Guide Volume III: Post-Processing
18/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
19/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
20/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
21/70
Chapter 4 DP_MICRESS
→
MICRESS® User Guide Volume III: Post-Processing
22/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
23/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
24/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
25/70
Chapter 4 DP_MICRESS
↔
MICRESS® User Guide Volume III: Post-Processing
26/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
27/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
28/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
29/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
30/70
Chapter 4 DP_MICRESS
▪
▪
▪
▪
MICRESS® User Guide Volume III: Post-Processing
31/70
Chapter 4 DP_MICRESS
Figure 4.19. The DP_MICRESS control
panel: virtual EDX
MICRESS® User Guide Volume III: Post-Processing
32/70
Chapter 4 DP_MICRESS
C1
field value
C2
C1
liquid
solid
µm
50
MICRESS® User Guide Volume III: Post-Processing
100
150
33/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
34/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
35/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
36/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
37/70
Chapter 4 DP_MICRESS
MICRESS® User Guide Volume III: Post-Processing
38/70
Chapter 5 ParaView
→
→
MICRESS® User Guide Volume III: Post-Processing
39/70
Chapter 5 ParaView
MICRESS® User Guide Volume III: Post-Processing
40/70
Chapter 5 ParaView
MICRESS® User Guide Volume III: Post-Processing
41/70
Chapter 5 ParaView
MICRESS® User Guide Volume III: Post-Processing
42/70
Chapter 5 ParaView
MICRESS® User Guide Volume III: Post-Processing
43/70
Chapter 5 ParaView
MICRESS® User Guide Volume III: Post-Processing
44/70
Chapter 5 ParaView
MICRESS® User Guide Volume III: Post-Processing
45/70
Chapter 6 gnuplot
MICRESS® User Guide Volume III: Post-Processing
46/70
Chapter 6 gnuplot
,
MICRESS® User Guide Volume III: Post-Processing
47/70
Chapter 6 gnuplot
-
gnuplot Command-Line
gnuplot> cd 'C:\Desktop\Results_Grain_Growth
gnuplot> set nokey
gnuplot> set xlabel "t"
gnuplot> set ylabel "R/µm"
gnuplot> plot "Grain_Growth_TabK.txt" u 1:2 w l lw 2
….
gnuplot> f(x) = R0 + k*x**m
gnuplot> R0=1
gnuplot> k=1
gnuplot> m=1
gnuplot> fit f(x) "Grain_Growth_TabK.txt" u 1:2 via
R0,k,m
gnuplot> replot f(x) w lines
gnuplot> print "R0:", R0, "µm"
gnuplot> print "k:", k
gnuplot> print "m:", m
gnuplot> pause -1
MICRESS® User Guide Volume III: Post-Processing
48/70
Chapter 6 gnuplot
MICRESS® User Guide Volume III: Post-Processing
49/70
Chapter 6 gnuplot
gnuplot Command-Line
gnuplot> cd 'C:\Desktop\Results_Gamma_Alpha'
gnuplot> set xlabel "t"
gnuplot> set ylabel "cumulated CPU-time"
gnuplot> plot "Gamma_Alpha_TabP.txt" u 1:2 w l
gnuplot> replot “Gamma_Alpha_TQ_TabP.txt” u 1:2 w l
MICRESS® User Guide Volume III: Post-Processing
50/70
Chapter 7 Data conversion: *.mcr to *.vtk
MICRESS® User Guide Volume III: Post-Processing
51/70
Chapter 7 Data conversion: *.mcr to *.vtk
MICRESS® User Guide Volume III: Post-Processing
52/70
Chapter 8 Post-processing Exercises
MICRESS® User Guide Volume III: Post-Processing
53/70
Chapter 8 Post-processing Exercises
MICRESS® User Guide Volume III: Post-Processing
54/70
Chapter 8 Post-processing Exercises
MICRESS® User Guide Volume III: Post-Processing
55/70
Chapter 8 Post-processing Exercises
MICRESS® User Guide Volume III: Post-Processing
56/70
Chapter 8 Post-processing Exercises
MICRESS® User Guide Volume III: Post-Processing
57/70
Chapter 8 Post-processing Exercises
MICRESS® User Guide Volume III: Post-Processing
58/70
Chapter 8 Post-processing Exercises
MICRESS® User Guide Volume III: Post-Processing
59/70
Chapter 9 Useful information and FAQ’ s
,
“
”.
MICRESS® User Guide Volume III: Post-Processing
60/70
Chapter 9 Useful information and FAQ’ s
MICRESS® User Guide Volume III: Post-Processing
61/70
Chapter 9 Useful information and FAQ’ s
MICRESS® User Guide Volume III: Post-Processing
62/70
Chapter 10 References
DP_MICRESS
ParaView
gnuplot
MICRESS® User Guide Volume III: Post-Processing
63/70
Chapter 11 Index
MICRESS® User Guide Volume III: Post-Processing
64/70
Chapter 11 Index