Download CVNC -M5 User Guide - John J. Jacobs

Transcript
4- and 5-Axis Surface Machining
Linearization
Figure 2-64 Example of LINTOL
If you have a postprocessor capable of correction for linearization, you can supply
the LINTOL value in a pass-through statement. See Customizing CVNC for
instructions on how to add new pass-through statements to your grammar file.
Having passed the linearization tolerance to the postprocessor, it ensures that the
tool path lies within the machining tolerance specified by INTOL and OUTTOL.
One way in which it might do this is by checking the extra tool points against the
original cut vector and selecting the minimum number to ensure that the tool
remains within the tolerance band. See the Figure 2-65 on page 2-79.
If either INTOL or OUTTOL value is zero, the linearization tolerance applies in
the same direction as if the value was not zero, as shown in the Figure 2-66 on
page 2-79.
2-78
CVNC-M5 User Guide